Wireless Water Meter Monitor Watches Waste

December 6, 2015 by Dan Maloney 10 Comments

It’s no secret that hackers like to measure things. Good numbers lead to good decisions, like when to kick your wastrel teenager out of a luxuriously lengthy shower. Hence the creation of this wireless Arduino-based water meter interface.

We’ll stipulate that “wireless” is a bit of a stretch. Creator [David Schneider] chose to split the system into two parts – a magnetometer and an Arduino to sense impulses from the water company meter, and a Raspberry Pi to serve the web interface. The water meter is at the street rather than in his house, so the sensor is wired to the Pi with some telephone cable. But from there the system is wireless.

[David] goes into some good detail on the sensing problem he faced, which relies on detecting the varying magnetic field due to the spinny-bits inside the flowmeter and cleaning up the signal with the Arduino; he also addresses aliasing errors that occur when flow rate approaches the sampling rate of the magnetometer.

We like the fact that there’s a lot of potential to leverage this technique to monitor other processes with rotating magnetic fields. And like this optically coupled gas-meter monitor, it’s not invasive of the utility’s equipment either, which is a plus.

[via reddit]

3 Nerds + 2 Days = Little Big Pixel

December 3, 2015 by Dan Maloney 2 Comments

Two days at a company sponsored hackathon? Sounds like fun to us! And productive too – the end result for [GuuzG] and two of his workmates from their company’s annual “w00tcamp” was this festive and versatile 16×16 pixel mega display.

From the sound of it, [GuuzG] and his mates at q42.com are not exactly hardware types, but they came up with a nice build nonetheless. Their design was based on 16 WS2812 LED strips for a 256 pixel display. An MDF frame was whipped up with cross-lap joints to form a square cell for each pixel. Painted white and topped with a frosted Plexiglass sheet, each RGB pixel has a soft, diffuse glow yet sharply defined borders. Powered by a pair of 5A DIN rail DC supplies and controlled by a Raspberry Pi, the finished display is very versatile – users can draw random pixel art, play the Game of Life, or just upload an image. [GuuzG] and company are planning to add Tetris, naturally, and maybe a webcam for fun.

We’ve seen lots of uses for the ubiquitous WS2812 LEDs, from clocks to Ambilight clones to ground-effect lighting for an electric skateboard. But if you’re in the mood for a display that doesn’t use LEDs, there’s always this multithreading display.

[via Reddit]

Swallow The Doctor — The Present And Future Of Robots Inside Us

November 30, 2015 by Dan Maloney 7 Comments

I recently finished the Silo series by Hugh Howey, a self-published collection of novellas that details life in a near-future, post-apocalyptic world where all that remains of humanity has been stuffed into subterranean silos. It has a great plot with some fun twists and plenty of details to keep the hacker and sci-fi fan entertained.

One such detail is nanorobots, used in later volumes of the series as both life-extending tools and viciously specific bio-weapons. Like all good reads, Silo is mainly character driven, so Howey doesn’t spend a lot of eInk on describing these microscopic machines – just enough detail to move the plot along. But it left me wondering about the potential for nanorobotics, and where we are today with the field that dates back to Richard Feynman’s suggestion that humans would some day “swallow the doctor” in a 1959 lecture and essay called “There’s Plenty of Room at the Bottom.”

Continue reading “Swallow The Doctor — The Present And Future Of Robots Inside Us” →

Basic Toolkit For The Basement Biohacker

November 27, 2015 by Dan Maloney 5 Comments

Laying hands on the supplies for most hacks we cover is getting easier by the day. A few pecks at the keyboard and half a dozen boards or chips are on an ePacket from China to your doorstep for next to nothing. But if hacking life is what you’re into, you’ll spend a lot of time and money gathering the necessary instrumentation. Unless you roll your own mini genetic engineering lab from scratch, that is.

Taking the form of an Arduino mega-shield that supports a pH meter, a spectrophotometer, and a PID-controlled hot plate, [M. Bindhammer]’s design has a nice cross-section of the instruments needed to start biohacking in your basement. Since the shield piggybacks on an Arduino, all the data can be logged, and decisions can be made based on the data as it is collected. One example is changing the temperature of the hot plate when a certain pH is reached. Not having to babysit your experiments could be a huge boon to the basement biohacker.

Biohacking is poised to be the next big thing in the hacking movement, and [M. Bindhammer]’s design is far from the only player in the space. From incubators to peristaltic pumps to complete labs in a box, the tools to tweak life are starting to reach critical mass. We can’t wait to see where these tools lead.

Biomimicry Challenge: Hack Like Mother Nature, Win $100k

November 26, 2015 by Dan Maloney 7 Comments

Hot on the heels of the 2015 Hackaday prize, with its theme of “Build stuff that matters”, comes another opportunity for hackers to make a difference. But you’ve got to think like Mother Nature for the 2016 Biomimicry Global Design Challenge.

The aim of this challenge is to transform the global food system using sustainable approaches that emulate natural process. Entries must address a problem somewhere in the food supply chain, a term that could apply to anything from soil modification to crop optimization to harvest and storage technologies. Indeed, the 2015 winner in the Student category was for a passive refrigeration system to preserve food in undeveloped areas. It’s a clever two-stage system that uses an evaporative cooling loop inspired by the way an elephant’s ears cool the giant beast, and by use of a wind-capturing funnel that mimics how animals as diverse as termites and meerkats cool their nests.

In addition to the Student category, the challenge has an Open category for teams of any composition. Up to 10 teams will be selected from the Open category to proceed to the Accelerator phase, where they’ll receive support for a six to nine month development of their design into a marketable product. The winner will be awarded the $100,000USD Ray of Hope prize, endowed by the Ray C. Anderson Foundation.

We’d love to see someone from the Hackaday community take home the 2016 prize, and there are plenty of 2015 Hackaday Prize entries that may be eligible. The deadline for submissions is 11 May 2016, so get a team together and get to work.

Turntable Sequencer Keeps The Techno Beat

November 25, 2015 by Dan Maloney 5 Comments

We’ve got to admit, we don’t have any idea what to call this hack. Artist [Graham Dunning] refers to it somewhat dryly as the “Mechanical Techno method”, but that doesn’t quite do it justice. We’re thinking “Turntable-sequencer-synthesizer-beat-box-dub-stepper thingy. With cowbell.”

Call it what you will, but [Graham] has really gone the distance in extracting as much sound as possible from the humble turntable, which is used as more of a synchronizer than a sound source. Although it does play records too – at least part of them; [Graham] masks the grooves and anchors the tone arm so that only part of a track is played. Other records are masked with conductive film over which wiper contacts are placed, providing triggers for various synthesizers. Particularly clever is the mechanical percussion section; a record is cut radially to form cams that mechanical followers trip over periodically to hit either the cone of a woofer for bass notes, or a cowbell for – well, cowbell.

It may not appeal to everyone, but you’ve got to admit there’s something mesmerizing about watching this rig in action. The beat is pretty catchy, and as you can see in the live performance video after the break, there’s a lot of room for [Graham] to express himself with this instrument. We wouldn’t mind seeing how Compressorhead would put this rig to work in their performances either.

Continue reading “Turntable Sequencer Keeps The Techno Beat” →

The Internet Of Minecraft Things Is Born

November 25, 2015 by Dan Maloney 10 Comments

Minecraft has come a long way since [Notch] first thought up the idea that would eventually make him a billionaire. The game can be enjoyed on so many levels and become so engaging that grown adults who should know better spend far more time playing it than working on, say, their backlog of Hackaday posts. As if that weren’t bad enough, now Minecraft threatens to break out of screen with the ability to control a WiFi light bulb from within the game.

For those unfamiliar with Minecraft, it’s an open world game that allows players to interact with blocks of various materials. Players can build, destroy, explore and create landscapes and structures. An active modding community contributes everything from cosmetic texture packs to new block types with extended functionality. It was one of these mods that was leveraged to “break the fourth wall” in Minecraft. [giannoug] used the OpenComputers mod, which allows placement of programmable in-game computers with a full complement of peripherals, including an Internet connection. That allowed [giannoug] to send commands to his Brand X eBay WiFi light bulb, the protocol for which his friend [Thomas] had previously reverse engineered. Flip a switch in Minecraft and the real-world light bulb comes on instantly. Pretty cool.

We’ve seen quite a few builds where Minecraft blocks inspired real-world lamps, but this is a step beyond and might be a great way to get kids into programming using Minecraft. But it’s not the first time Minecraft has broken the fourth wall – check out this 2012 effort to build a microcontroller-based Minecraft server that can toggle pins from within the game.

[Thanks to aggvan and Stathis K for the near-simultaneous tips!]