Fail Of The Week: EPROMs, Rats’ Nests, Tanning Lamps, And Cardboard On Fire

January 2, 2019 by Elliot Williams 87 Comments

It all started when I bought a late-1990s synthesizer that needed a firmware upgrade. One could simply pull the ROM chip, ship it off to Yamaha for a free replacement, and swap in the new one — in 2003. Lacking a time machine, a sensible option is to buy a pre-programmed aftermarket EPROM on eBay for $10, and if you just want a single pre-flashed EPROM that’s probably the right way to go. But I wanted an adventure.

Spoiler alert: I did manage to flash a few EPROMs and the RM1X is happily running OS 1.13 and pumping out the jams. That’s not the adventure. The adventure is trying to erase UV-erasable EPROMS.

And that’s how I ended up with a small cardboard fire and a scorched tanning lamp, and why I bought a $5 LED, and why I left EPROMs out in the sun for four days. And why, in the end, I gave up and ordered a $15 EPROM eraser from China. Along the way, I learned a ton about old-school UV-erasable EPROMs, and now I have a stack of obsolete silicon that’s looking for a new project like a hammer looks for a nail — just as soon as that UV eraser arrives in the mail.

Continue reading “Fail Of The Week: EPROMs, Rats’ Nests, Tanning Lamps, And Cardboard On Fire” →

Listen To A Song Made From Custom Nintendo LABO Waveform Cards

October 14, 2018 by Donald Papp 2 Comments

[Hunter Irving] has been busy with the Nintendo LABO’s piano for the Nintendo Switch. In particular he’s been very busy creating his own custom waveform cards, which greatly expands the capabilities of the hackable cardboard contraption. If this sounds familiar, it’s because we covered his original method of creating 3D printed waveform cards that are compatible with the piano, but he’s taken his work further since then. Not only has he created new and more complex cards by sampling instruments from Super Nintendo games, he’s even experimented with cards based on vowel sounds in an effort to see just how far things can go. By layering the right vowel sounds just so, he was able to make the (barely identifiable) phrases I-LIKE-YOU, YOU-LIKE-ME, and LET’S-A-GO.

Those three phrases make up the (vaguely recognizable) lyrics of a song he composed using his custom waveform cards for the Nintendo LABO’s piano, appropriately titled I Like You. The song is at the 6:26 mark in the video embedded below, but the whole video is worth a watch to catch up on [Hunter]’s work. The song is also hosted on soundcloud.

Continue reading “Listen To A Song Made From Custom Nintendo LABO Waveform Cards” →

Making A Vintage 1990s Sound Board Do Rapid Fire Silently

August 27, 2018 by Steven Dufresne 19 Comments

Sometimes a mix of old and new is better than either the old or new alone. That’s what [Brad Carter] learned when he was given an old 1990s sound board with a noisy SCSI drive in it. In case you don’t know what a sound board is, think of a bunch of buttons laid out in front of you, each of which plays a different sound effect. It’s one way that radio DJ’s and podcasters intersperse their patter with doorbells and car crash sounds.

Before getting the sound board, [Brad] used a modern touchscreen table but it wasn’t responsive enough to get a machine gun like repetition of the sound effect when pressing an icon in rapid succession. On the other hand, his 1990s sound board had very responsive physical buttons but the SCSI hard drive was too noisy. He needed the responsiveness of the 1990s physical buttons but the silence of modern solid state storage.

And so he replaced the sound board’s SCSI drive with an SD card using a SCSI2SD adaptor. Of course, there was configuration and formatting involved along with a little trial and error to get the virtual drive sizes right. To save anyone else the same difficulties, he details all his efforts on his webpage. And in the video below you can see and hear that the end result is an amazing difference. Pressing the physical buttons gives instant sound and in machine gun fashion when pressed in rapid succession, all with the silence of an SD card.

A SCSI2SD card is a nice off-the-shelf solution but if you want something a little more custom then there’s a Raspberry Pi SCSI emulator and one which uses a Teensy with a NCR5380 SCSI interface chip.

Continue reading “Making A Vintage 1990s Sound Board Do Rapid Fire Silently” →

Electronic ColorChord Turns Color Into Sound

July 6, 2018 by Steven Dufresne 13 Comments

[Dr. Cockroach] has delighted us again with another of his circuits on cardboard. He calls it steampunk inspired, and while we guess we can see what he’s getting at, it’s more like a sweet example of artful dead bug construction. He calls it the ColorChord. Point its photo cells at a color and it’ll play a tone or a combination of tones specific to that color.

Three 555-centric boards use thumbtacks as connection points which he solders to, the same technique he used for his cardboard computer. They provide simple tones for red, green, and blue and a mix for any other color. However, he found that the tones weren’t distinguishable enough for similar colors like a bright sun yellow and a reddish yellow. So he ended up pulsing them using master oscillator, master-slave flip-flop, and sequencer circuits, all done dead bug style.

We’re not sure how practical it is but the various pulsed tones remind us of the B space movies of the 1950s and 60s. And as for the look of it, well it’s just plain fun to look at. Hear and see it for yourself in the video below.

And if you want to see some dead bug circuitry as high art then check out this awesome LED ring, this sculptural nixie clock, and perhaps the most wondrous of all, The Clock.

Continue reading “Electronic ColorChord Turns Color Into Sound” →

Waking Up To Classic Soundgarden Screaming

May 7, 2018 by Tom Nardi 12 Comments

In a project that was really only slighly less creepy before the singer’s untimely death in 2017, this alarm clock built by [Rafael Mizrahi] awakens its user to a random selection of Chris Cornell’s signature screams. Not content to be limited to just the audio component of the experience, he contained all of the hardware within a styrofoam head complete with a printed out facsimile of the singer’s face.

An Arduino Uno coupled with a seven segment LED display provides the clock itself, which is located in the base. There’s no RTC module, so the Arduino is doing its best to keep time by counting milliseconds. This means the clock will drift around quite a bit, but given that there’s also no provision for setting the time or changing when the alarm goes off short of editing the source code, it seems like accurate timekeeping was not hugely important for this project.

Audio is provided by an Adafruit VS1053, which contains a microSD card full of MP3 samples of Cornell’s singing. This is connected to an X-Mini portable capsule speaker which has been installed in a hollowed out section of the foam.

Unconventional alarm clocks are something of a staple here at Hackaday. From ones which physically assault you to mimicking sunrise with OLEDs, we thought we had seen it all. We were wrong.

Continue reading “Waking Up To Classic Soundgarden Screaming” →

PS Vita Hacked To Accept Micro SD Instead Of Costly Memory Cards

May 30, 2017 by Jack Laidlaw 23 Comments

Sony loves to have control of their own media formats: Beta, DAT, Minidisc, MemoryStick, Universal Media Disc, MemoryStick Micro, and more. When they released the PS Vita they used a format that was similar in shape to SD but not compatible. The higher capacity ones can be quite costly, However [thesixthaxis] Report there is a PS Vista Micro SD hack on the way.

PS Vita hacker [Yifan Lu]’s adapter replaces the 3G modem, allowing end users to plug a MicroSD card in its place. And this means using standard MicroSD memory cards instead of Sony’s overpriced proprietary memory. This is the coolest PS Vita hack since PS Vita’s Final Fantasy X.

Sounds like good news all round? Well, there are a few small caveats. In order to use the hack you need a 3G-capable Vita running HENkaku which means running firmware 3.60 or under. The adapter is still in prototype stage, but it’s available from the fully-funded Indiegogo campaign if you’re interested.

Vintage Telegraph Sounder Clicks Again

April 6, 2017 by Dan Maloney 8 Comments

It’s sad, when you think about it: a retired railroad telegraph operator, who probably once pounded out code at 40 words per minute, with a collection of vintage sounders silently gathering dust on a shelf. [kthrace] decided to do something about that, and built this Morse sender to bring those old sounders back to life.

As archaic as Morse might seem, it’s a life skill, one the 92-year old former brass-pounder for whom this was built was eager to practice again. There are code practice oscillators, of course, but dits and dahs are no substitutes for the electromagnetic clicks and clacks that once filled this old fellow’s days. There’s not much information on the circuit, but it looks like [kthrace] chose a RedBoard to read Morse from an SD card and drive some relays to support up to four sounders; that’ll make a racket! The case is custom made and nicely complements the wood and brass of the J.H. Bunnell and Co. sounder, which still sounds great after all these years.

Test your Morse skills in the video below – copying code is a lot harder from a sounder than from an oscillator. Find yourself in need of practice? We’ve got you covered.

Continue reading “Vintage Telegraph Sounder Clicks Again” →