This 3D Printer Enclosure Takes Ventilation Seriously

October 9, 2017 by 17 Comments

A lot of work has gone into hacking common items (like IKEA Lack tables) into useful and effective 3D printer enclosures, but [Stefan.Lu] has taken a harder look at the whole business. He decided to start with some specific goals that were unmet by current solutions. In particular, he wanted to allow for proper ventilation and exhaust. Not only do some filaments smell bad, but there is ongoing research around UFP (ultra-fine particles) emitted from the 3D printing process. Just in case UFPs turn out to be this generation’s asbestos or something equally terrible, [Stefan.Lu] felt that a bit more work and expense up front would be worth it to meet his goals of a ventilation-friendly enclosure.

In addition to ventilation and exhaust, [Stefan.Lu] wanted to locate the printer at a comfortable working height, and preferred not to build things entirely from scratch. He did it for well under $200 by using a common storage rack shelf as the foundation and acrylic panels for the sides, and a few thoughtful uses of basic hardware. The angled metal supports made for easy attachment points and customization, and a combination of solid shelf plus anchoring to the wall put an end to vibrations. The side panels are secured by magnets, and [Stefan.Lu] points out that if you don’t have access to a laser cutter, cast acrylic withstands drilling and cutting better than extruded acrylic.

The final touch was a fire alarm, which is an excellent precaution. 3D printers are heating elements with multiple moving parts and they often work unattended. It makes sense to have a fire alarm around, or at least not enclose the device in highly flammable material in the first place.

Our Reactions To The Treatment Of Robots

October 9, 2017 by 80 Comments

Most of us have seen employees of Boston Dynamics kicking their robots, and many of us instinctively react with horror. More recently I’ve watched my own robots being petted, applauded for their achievements, and yes, even kicked.

Why do people react the way they do when mechanical creations are treated as if they were people, pets, or worse? There are some very interesting things to learn about ourselves when considering the treatment of robots as subhuman. But it’s equally interesting to consider the ramifications of treating them as human.

The Boston Dynamics Syndrome

Atlas being pushed
Spot being kicked

Shown here are two snapshots of Boston Dynamics robots taken from their videos about Spot and Atlas. Why do scenes like this create the empathic reactions they do? Two possible reasons come to mind. One is that the we anthropomorphize the human-shaped one, meaning we think of it as human. That’s easy to do since not only is it human-shaped but the video shows it carrying a box using human-like movements. The second snapshot perhaps evokes the strongest reactions in anyone who owns a dog, though its similarity to any four-legged animal will usually do.

Is it wrong for Boston Dynamics, or anyone else, to treat robots in this way? Being an electronic and mechanical wizard, you might have an emotional reaction and then catch yourself with the reminder that these machines aren’t conscious and don’t feel emotional pain. But it may be wrong for one very good reason.

Continue reading “Our Reactions To The Treatment Of Robots” →

Project Loon Will Float LTE To Puerto Rico

October 9, 2017 by 18 Comments

Some of the biggest names in technology have offered their help in rebuilding Puerto Rico’s infrastructure. The newest name on the list? The X division of Alphabet, who want to help fill the huge communications gap using Project Loon, their high-altitude balloon network. It looks like X is going to get their wish, as they have just been granted license from the FCC to deploy LTE cell coverage to both Puerto Rico and the US Virgin Islands.

The plan is to launch 30 balloons that will act as a network of floating cell towers to radiate an LTE signal originating from the ground. This coverage would be a great boon to a devastated communications infrastructure, but it won’t be a cakewalk to implement. Some handsets of both major persuasions will require a temporary over-the-air update before they can use Project Loon’s network. For phones that can’t operate on Band 8, it won’t work at all. Even so, it’s a great start.

Now you would think that an emergency communications restoration plan like this would be met by all parties with open arms and a circle of pats on the back, but this solution requires a lot of cooperation. One of the major hurdles was to secure spectrum rights from some if not all of the incumbent wireless carriers. Miraculously, eight of them have agreed to hand over their bandwidth. Another issue is that the FCC license is only good for six months, although they would probably entertain an extension given the circumstances. Finally, the dual ownership of the Virgin Islands makes the situation even more complicated, as X must agree not to infringe upon the wireless coverage footprint of the British Virgin Islands.

Via r/Futurology

Trading Bird Food For Cigarette Butts

October 9, 2017 by 98 Comments

Positive reinforcement is the process of getting someone to understand their actions result in a reward. Children get a sweet treat when they pick up all their toys and older ones might get some cash for mowing the lawn. From the perspective of the treat-giver, this is like turning treats into work. A Dutch startup wants to teach the crow population to pick up cigarette butts in exchange for bird treats.

The whole Corvidae family of birds is highly intelligent so it shouldn’t be a problem training them that they will get a reward for depositing something the Hominidae family regularly throw on the street where the birds live. This idea is in turn an evolution of the open-source Crow Box.

For some, leveraging the intelligence of animals is more appealing than programming drones which could do the same thing. A vision system mixed with a drone and a manipulator could fulfull the same function but animals are self-repairing and autonomous without our code. The irony of this project is that, although it’s probably fairly easy to train crows to recognize cigarette butts, the implementation hinges on having a vision system that can recognize the butts in order to properly train the crows in the first place.

If we had the time to train crows, it would definitely be to poop on cars that don’t signal for turns. Maybe some of these winged devices can be programmed to recognize lapses in traffic laws in exchange for some electrons.

Thank you, [jo_elektro], for the tip.

 

Global Thermonuclear War: Tweeted

October 8, 2017 by 22 Comments

[Andreas Spiess] did a video earlier this year about fallout shelters. So it makes sense now he’s interested in having a Geiger counter connected to the network. He married a prefabricated counter with an ESP32. If it were just that simple, it wouldn’t be very remarkable, but [Andreas] also reverse-engineered the schematic for the counter and discusses the theory of operation, too. You can see the full video, below.

We often think we don’t need a network-connected soldering iron or toaster. However, if you have a radiological event, getting a cell phone alert might actually be useful. Of course, if that event was the start of World War III, you probably aren’t going to get the warning, but a reactor gas release or something similar would probably make this worth the $50.

Continue reading “Global Thermonuclear War: Tweeted” →

Casa Jasmina Two Years On

October 8, 2017 by 3 Comments

[Bruce Sterling], author of fiction and nonfiction tomes aplenty, wrote up one of his projects for Makezine: Casa Jasmina, an IoT “house of the future”. Located in Torino, Italy, it was built upstairs from the Torino Fab Lab as a collaboration between [Bruce], his wife [Jasmina Tesanovic], and a number of other contributors. The original vision was for Casa Jasmina to be jam packed with cool laser-cut furniture, glowing LED projects, and other Maker Faire goodies.

In his piece, however, [Bruce] dials back Casa Jasmina’s technology focus. At a time when people add dodgy WiFi-capable devices to their house willy-nilly, he made it clear that it’s not just a huge assembly of projects no one fully understands. The concept of “making”, [Bruce] writes in his piece, involves algorithms and circuit boards and computer-controlled fabrication machines, and marginalizes those who don’t understand or find fascinating technological innovations. To those who love fabrication, for instance, there is a giddiness involved in creating one’s own chair out of plywood — but end users mostly just care that the creation works like a chair. The place is an AirBNB which makes it a great testbed for providing only what is needed, trusted, and stable.

For  more futuristic houses, check out our coverage of 3D-printed concrete houses and this Pi-controlled automated green house.

 

 

Hackaday Links Column Banner

Hackaday Links: October 8, 2017

October 8, 2017 by 40 Comments

On the top of the popcorn pile for this weekend is an ambiguous tweet from Adafruit that was offered without comment or commentary. [Lady Ada] is holding some sort of fancy incorporation papers for Radio Shack. The smart money is that Adafruit just bought these at the Radio Shack auction a month or so ago. The speculation is that Adafruit just bought Radio Shack, or at least the trademarks and other legal ephemera. Either one is cool, but holy crap please bring back the retro 80s branding.

A Rubik’s Cube is a fantastic mechanical puzzle, and if you’ve never taken one apart, oh boy are you in for a treat. Here’s an RGB LED Rubick’s Cube with not enough detail as to how each square is getting powered. Here’s an open challenge for anyone: build an RGB LED Rubick’s Cube, and Open Source the design.

Last weekend, the front fell off the engine of an Air France A380 flying over Greenland. As with all aircraft incidents, someone has to find the missing bits. It only took a week to find a mangled cowling on an ice sheet. This is incredibly impressive; if you want a comparison to another accident, it took three months to find the fan disk for UA 232 in an Iowa cornfield.

Poorly thought out Kickstarters don’t grab our attention like they used to, but this is an exception. The Aire is a mashup of one of those voice-activated home assistants (Alexa, whatever the Google one is named…) and a drone. The drone half of the build is marginally interesting as a ducted fan coaxial thingy, and building your own home assistant isn’t that hard with the right mics and a Raspberry Pi. The idea is actually solid — manufacturing is another story, though. It appears no one thought about how annoying it would be to have a helicopter following them around their house, or if the mics would actually be able to hear anyone over beating props. Here’s the kicker: this project was successfully funded. People want to buy this. A fool and his or her money…

Processing is cool, although we’re old skool and still reppin’ Max/MSP. It looks like the first annual Processing Community Day is coming up soon. The Processing Community Day will be at the MIT Media Lab on October 21st, with talks from the headliners of the Processing community.

Maker Faire NYC was two weekends ago, the TCT show in Birmingham was last week, and Open Hardware Summit was in Denver this weekend. Poor [Prusa] was at all of them, racking up the miles. He did, however, get to ride [James from XRobots.co.uk]’s electric longboard. There’s some great videos from [James] right here and here.

Speaking of Open Hardware Summit, there was a field trip to Sparkfun and Lulzbot this Friday. The highlight? The biggest botfarm in the states, and probably the second largest in the world. That’s 155 printers, all in their own enclosures, in a room that’s kept at 80° F. They’re printing ABS. Control of the printers is through a BeagleBone running Octoprint. These ‘Bones and Octoprint only control one printer each, and there is no software layer ‘above’ the Octoprint instances for managing multiple printers simultaneously. That probably means the software to manage a botfarm doesn’t exist. There have been attempts, though, but nothing in production. A glove thrown down?