Hackaday Links: December 17, 2023

December 17, 2023 by Dan Maloney 16 Comments

Disappointing news from the US Senate this week as the “AM Radio for Every Vehicle Act” failed to advance in the ~~sausage-making~~ legislative process. We’ve previously covered this bill, which aims to force vehicle manufacturers to provide the means to receive terrestrial AM broadcasts in their cars and trucks without the need for extra subscriptions or charges. The bill’s sponsors tried to get it through on a “unanimous consent” maneuver, but Senator Rand Paul decided he didn’t like the idea of the government mandating what equipment cars should have. The coverage we’ve seen on this bill leads us to believe its sponsors are missing the point. Instead of pitching this as an issue of freedom of choice in entertainment, what they should be concentrating on is the safety aspect of AM radio. We’ve seen how much the government has invested in keeping AM stations on the air in just about any foreseeable emergency, so it’s only natural to look at a car’s AM radio as essential safety equipment like airbags, antilock brakes, and backup cameras. Seems like that’s something that everyone can agree on. Continue reading “Hackaday Links: December 17, 2023” →

You Can’t Make What You Can’t Measure

December 16, 2023 by Elliot Williams 30 Comments

What’s the most-used tool on your bench? For me, it’s probably a multimeter, although that’s maybe a tie with my oscilloscope. Maybe after that, the soldering iron and wire strippers, or my favorite forceps. Calipers must rate in there somewhere too, but maybe a little further down. Still, the top place, and half of my desert-island top-10, go to measuring gear.

That’s because any debugging, investigation, or experimentation always starts with getting some visibility on the problem. And the less visible the physical quantity, the more necessary to tool. For circuits, that means figuring out where all the voltages lie, and you obviously can’t just guess there. A couple months ago, I was doing some epoxy and fiberglass work, and needed to draw a 1/2 atmosphere vacuum. That’s not the kind of quantity you can just eyeball. You need the right measurement tool.

A few weeks ago, I wrote about my disappointment in receiving a fan that wouldn’t push my coffee beans around in the homemade roaster. How could I have avoided this debacle? By figuring out the pressure differential needed and buying a fan that’s appropriately rated. But I lacked pressure and flow meters.

Now that I think about it, I could have scavenged the pressure meter from the fiberglassing rig, and given that a go, but with the cheap cost of sensors and amplifiers, I’ll probably just purpose-build something. I’m still not sure how I’ll measure the flow; maybe I’ll just cheese out and buy a cheap wind-speed meter.

When people think of tools, they mostly think of the “doers”: the wrenches and the hammers of this world. But today, let’s all raise a calibrated 350 ml glass to the “measurers”. Without you, we’d be wandering around in the dark.

Hackaday Podcast Episode 248: Cthulhu Clock Radio Transharmonium, Thunderscan, And How To Fill Up In Space

December 15, 2023 by Dan Maloney No comments

This week, Elliot sat down with Dan for the penultimate podcast of 2023, and what a week it was. We started with news about Voyager; at T+46 years from launch, any news tends to be bad, and the latest glitch has everyone worried. We also took a look at how close the OSIRIS-REx mission came to ending in disaster, all for want of consistent labels.

Elliot was charmed by a Cthulhu-like musical instrument, while Dan took a shine to a spark gap transmitter that’s probably on the FCC’s naughty list. Any sufficiently advanced technology is indistinguishably from magic, and we looked at the laser made possible by the magician-in-chief himself, C.V. Raman. Why would you stuff a PSU full of iron filings? Probably for the same reason you’d print fake markings on a 6502 chip. We also took a look at the chemistry and history of superglue, a paper tape reader that could lop off your arm, and rocket gas stations in space.

Grab a copy for yourself if you want to listen offline.

Continue reading “Hackaday Podcast Episode 248: Cthulhu Clock Radio Transharmonium, Thunderscan, And How To Fill Up In Space” →

This Week In Security: Traingate, DNS, And JMP Slides

December 15, 2023 by Jonathan Bennett 5 Comments

Remember Dieselgate, the scandal where certain diesel vehicles would detect an emissions test, and run cleaner for it, “cheating” the test? Traingate may just put that one into perspective. We’ll tell the story from the beginning, but buckle up for a wild and astonishing ride. It all starts with Polish trains getting a maintenance overhaul. These trains were built by Newag, who bid on the maintenance contract, but the contract was won by another company, SPS. This sort of overhaul involves breaking each train into its components, inspecting, lubricating, etc, and putting it all back together again. The first train went through this process, was fully reassembled, and then refused to move. After exhausting all of the conventional troubleshooting measures, SPS brought in the hackers.
Continue reading “This Week In Security: Traingate, DNS, And JMP Slides” →

Hacker Tactic: Internal ESD Diode Probing

December 14, 2023 by Arya Voronova 15 Comments

Humans are walking high voltage generators, due to all the friction with our surroundings, wide variety of synthetic clothes, and the overall ever-present static charges. Our electronics are sensitive to electrostatic discharge (ESD), and often they’re sensitive in a way most infuriating – causing spurious errors and lockups. Is there a wacky error in your design that will repeat in the next batch, or did you just accidentally zap a GPIO? You wouldn’t know until you meticulously check the design, or maybe it’s possible for you to grab another board.

Thankfully, in modern-day Western climates and with modern tech, you are not likely to encounter ESD-caused problems, but they were way more prominent back in the day. For instance, older hackers will have stories of how FETs were more sensitive, and touching the gate pin mindlessly could kill the FET you’re working with. Now, we’ve fixed this problem, in large part because we have added ESD-protective diodes inside the active components most affected.

These diodes don’t just help against ESD – they’re a general safety measure for protecting IC and transistor pins, and they also might help avoid damaging IC pins if you mix. They also might lead to funny and unexpected results, like parts of your circuit powering when you don’t expect them to! However, there’s an awesome thing that not that many hackers know — they let you debug and repair your circuits in a way you might not have imagined.

Continue reading “Hacker Tactic: Internal ESD Diode Probing” →

PCIe For Hackers: External PCIe And OCuLink

December 13, 2023 by Arya Voronova 23 Comments

We’ve seen a lot of PCIe hacks on Hackaday, and a fair few of them boil down to hackers pulling PCIe somewhere it wasn’t meant to be. Today, we routinely can find PCIe x1, x2 and x4 links sitting around in our tech, thanks to the proliferation of things like NVMe SSDs, and powerful cheap SoCs that make PCIe appear at your fingertips.

In the PCIe For Hackers series, we’ve talked about PCIe and how cool it is, all the benefits it has for hackers, gave you layout and interconnection rules, and even went into things like PCIe switches and bifurcation. However, there’s one topic we didn’t touch much upon, and that’s external PCIe links.

Today, I’d like to tell you about OCuLink – a standard that hackers might not yet know as an option whenever we need to pull PCIe outside of your project box, currently becoming all that more popular in eGPU space. Essentially, OCuLink is to PCIe is what eSATA is to SATA, and if you want to do an eGPU or an external “PCIe socket”, OCuLink could work wonders for you.

Respectable Capabilities

Just like any high-speed standard, PCIe has some tight requirements when things get fast. Even though PCIe is known to be not as sensitive to lower-quality links due to its link training and generation downgrade abilities, at higher link speeds, even through-hole vs SMD sockets can make a difference. So, if you want to go high-throughput, you want proper cabling and connectors, intended for out-of-chassis use – and OCuLink gives you all of this, at a low price.

Continue reading “PCIe For Hackers: External PCIe And OCuLink” →

Some Bacteria Could Have A Rudimentary Form Of Memory

December 12, 2023 by Lewin Day 9 Comments

When we think of bacteria, we think of simple single-celled organisms that basically exist to consume resources and reproduce. They don’t think, feel, or remember… or do they? Bacteria don’t have brains, and as far as we know, they’re incapable of thought. But could they react to an experience and recall it later?

New research suggests that some bacteria could have a rudimentary form of memory of their experiences in the environment. They could even pass this memory down across generations via a unique mechanism. Let’s dive into the latest research that is investigating just what bacteria know, and how they happen to know it.

Continue reading “Some Bacteria Could Have A Rudimentary Form Of Memory” →