Architectural LED Install Shows How To Do It With Style

Anyone can string up some LED string lights in a space with mixed results. However, if you want to create a lighting environment that’s classy and stylish, it takes a little more finesse. [ipad.bendavid] has a great example of this, with a rather tidy architectural LED installation.

The final look is quite clean and evenly lit, without requiring the use of any diffuser material.

The electronic side of things is relatively straightforward. There’s an ESP32 running the show, commanding the colors for 928 individually-addressable WS2812 RGB LEDs. It uses the WebSocket API for real time control, integrates with Home Assistant, and even offers audio reactive lighting modes with the aid of an INMP441 I2S audio input module. A hefty 5 V, 60 A power supply ensures the LEDs are never short of juice. There was also careful attention paid to power distribution to avoid any dim spots or other issues.

Where it gets really cool, though, is the attention paid to the construction of the installation. The LED strips are installed in concentric square frames, which block light in specific areas to create a nice square pattern, with the LEDs facing the wall they’re installed on rather than projecting out to the viewer. This hides the strips themselves and eliminated the need for diffusers which can be a pain to get right.

Overall, the build is a pleasing one that plays with light and darkness and looks rather stylish in a way so many LED installs don’t. If you’re cooking up your own neat glowable projects, you know we’d love to see them on the tipsline.

Open Source Stream Deck Targets Flexibility

Stream decks are very useful when you’re live on camera and you need to hit some complicated macro at a glance. However, there is sometimes a perception that commercial options are a touch expensive for what they are, an attitude which has spawned many DIY builds. [Fady Faheem] has developed just such a device of his own.

Named Stream32, the build is intended to be simple to understand and adapt to one’s own individual workflow. Putting one together is as easy as buying a display, hooking it up to an ESP32, flashing the firmware, and then adding pages of shortcuts as desired. [Fady] has designed the firmware to be flexible with regards to screen choice — currently, it can be set up for a 4″ Waveshare LCD or a nice roomy 10.1″ display from Elecrow. Since it’s open source, adapting to a wider range of displays is a potential exercise for the builder.

The great thing about custom stream decks is you have all the freedom in the world to customize them to your own specific setup. Play with the code, the functionality, the visual layout—all to suit your own needs. If you’re working on your own custom hardware, be sure to tell us on the tipsline.

A Compact Game Controller For Your Phone

[Gil Yankovitch] noted that playing games on a touchscreen phone gave up a certain something in terms of the tactile feedback one gets from real buttons. To that end, he was inspired to build a controller specifically for phones that solved this very problem.

The result was JoyFon. It’s a small gamepad built around the Raspberry Pi Pico, and can be put together around an RP2040 or an RP2350 as desired. It has four face buttons, a directional pad, and start and select buttons, as well as additional shoulder buttons up top in later revisions.

The JoyFon enumerates as a standard USB HID gamepad, so you could use it to play games on just about any PC, laptop, or tablet. However, the JoyFon is specifically designed for use with smartphones in the vertical orientation. This guided the design of the 3D printed enclosure, which positions the USB-C port to plug into the base of a phone, such that the buttons sit neatly beneath it. It does cover some of the phone screen, but that’s not always a problem when playing emulated games with a 4:3 or similar aspect ratio. The result is a button and screen layout not dissimilar to that of the original Game Boy handhelds.

We’ve seen some other great custom controller builds over the years, like this fantastic design using keyswitches.

Continue reading “A Compact Game Controller For Your Phone” →

Tiny Desktop Robot Has Radar

One thing our futuristic world is largely lacking in is droids and robot companions and the like. [solitary dev] is helping to rectify that problem by building a little robot called TongDou.

As [solitary dev] tells it, TongDou is a “tiny open-source desktop gremlin.” An ESP32-S3 serves as TongDou’s brain, buried inside a tasteful brass chassis. An OLED display is TongDou’s face, and he uses a pair of wheels driven by gearmotors for locomotion. A speaker plays back pre-recorded voice lines, while a 24 GHz radar and an IMU enables TongDou to keep track of the space it’s moving through. They are publishing the design files on GitHub so other makers can build their own if so desired.

[solitary dev] hopes to develop TongDou into something to make a “workspace feel less dead.” It’s not dissimilar from the way studios used to use robots to liven up otherwise hackneyed movies and TV shows, and we could absolutely use some of that whimsy in the real world. We’ve featured other fun desktop companions before, too.

Continue reading “Tiny Desktop Robot Has Radar” →

NES Advantage Stick Gets Bluetooth Upgrade

The NES Advantage was a cool bit of hardware back in 1987, bringing an arcade stick to the home console gaming experience. Naturally they don’t get much use these days, unless of course they’ve been modded to work with modern systems, as [Aaron] has done.

[Aaron]’s goals were straightforward. The stick should work with modern systems over Bluetooth, but the mod should not involve cutting the case or making any new holes. All controls, including Turbo and Slow Motion, still had to work, too, and there would be no adding extra buttons for configuration or control.

To achieve this, [Aaron] whipped up a custom PCB which replaces the original cable attached to the NES Advantage. Power is via a small LiPo cell, charged via a TP4056 and paired with a TPS63900 buck-boost converter. An ESP32-WROOM-32E interfaces all the original controls, reading the stick’s CD4021 shift registers to do so. It then either emulates a Switch Pro Controller over Bluetooth Classic, for use with a modern Nintendo Switch, or it acts as a standard Bluetooth Low Energy gamepad for use with PCs, SteamOS, phones, and other compatible hardware. All that and the stick can still work with an original NES if so desired, when placed in the Switch Pro Controller mode. You merely need to plug in an 8BitDo NES Retro Receiver and you’re up and running.

We’ve seen other fun retro controller builds before, too, like this classic Xbox controller modded to work with the Xbox 360. If you’re cooking up similar projects, we’d love to hear about it on the tipsline.

Building A Reproduction PlayStation Motherboard

Thanks to things like spilled drinks, leaky batteries, and the general ravages of time, older consoles can be tough to keep going. In particular, excessive damage to a motherboard can make repair difficult or near-impossible to execute even if the rest of the console is in otherwise passable condition. Now, there may be greater hope for those looking to resurrect the worst-treated PlayStations out there, thanks to a new open-source motherboard from [xyzz].

The board is up on GitHub with a CC0-1.0 license. It’s aiming to be a drop-in replacement for the stock motherboard, on to which you would transplant all the necessary proprietary hardware from an existing donor board. The list of transplant parts is quite extensive as you’d expect, including the CPU, GPU, RAM, VRAM, BIOS, sound chips, mechanical control chip, crystals, and all the ports, among others. Some generic parts can still be had off the shelf, but you could also transplant them if so desired. There are some headaches with the current design—namely, it doesn’t fit perfectly with the lid switch connector, and some of the footprints are hard to solder. Still, it’s a great start, and early testing shows that it’s already quite functional.

Fortunately the original PlayStation didn’t have any sort of battery on board to leak all over the place and corrode things, but boards still get damaged in a variety of other un-fun ways. Thus, it’s great to have a potential replacement motherboard on offer to bring badly-damaged machines back to life.

We’ve featured other great restoration projects in this vein before, too, like the efforts to recreate the C64 motherboard from a few years ago. As ever, enthusiasts are doing great work to keep these classic machines alive long into the future.

Thanks to [ToolThatIsTom] for the tip.

A Capable KVM Built With The ESP32

[Evgenij Spitsyn] spotted a KVM build on these very pages some time ago. That inspired their own build, leveraging the versatility of the ESP32-P4 microcontroller.

The concept is straightforward. Named the ESPKVM, the device is designed to hook up to a computer’s HDMI and USB ports. It captures the video output, while presenting itself as a standard keyboard and mouse device. In this way, it allows remote control of the machine over IP. It achieves this feat with the aid of the Toshiba TC358743 HDMI-to-CSI bridge, which is essentially the video capture hardware of the build.

The video output of the machine is streamed in MJPEG or H.264 format. The device is capable of serving up storage from a micro SD card or the onboard flash, as well as handling things like power/reset control and wake-on-LAN. All in all, it’s a very complete package, and full of useful features. Just don’t use it over the public internet yet — [Evgenij] notes it hasn’t been reviewed for potential security holes yet, even though it has some basic authentication features baked in.

If you’ve got an ESP32-P4 ready to go with a TC358743 HDMI bridge, you can actually head over to the ESPKVM website and flash the code right in your browser to get going. Meanwhile, if you found this build interesting, you might like to scope out the one that inspired it. If you’re cooking up similar utility hacks, be sure to notify the Hackaday tipsline.