Custom Cable Management

August 31, 2009 by 19 Comments

3386152715_53461c9c30

You would be hard pressed to find a hacker who doesn’t have in some form a rats nest of wires and cables behind their computer desk. [Antoine] decided to tackle the problem and came up with his custom built cable management system. There is little info, but he does say his setup uses Ikea Antonius coat hangers and some hollow tube. Its quick and wont leave a residue like some cable solutions, so long as you don’t mind a screw hole or two. We especially like how if you need to change your setup you wont have to re-zip tie everything.

I-Swarm Robot Update

August 31, 2009 by 9 Comments

I-Swarm_Micro_Robot_On_Thumb

Back in October we reported on the I-Swarm robotics project. [Travis] sent us some more information. These tiny robots are programmed optically and are able to respond to programming commands via an infrared signal. Locomotion is facilitated with piezoelectric actuators and the power to the units provided through a solar cell. It is not clear that this project is still ongoing as the I-Swarm web page lists a project termination date of 6/31/2008. That being said, the video embedded after the break was posted two days ago showing swarm movement and detailing the programming, testing, and hardware specifics. Continue reading “I-Swarm Robot Update” →

Internet Enabled Furby

August 31, 2009 by 18 Comments

furby_arduino

[edwindertien] sent us his project to connect a Furby to the internet. The original Furby controller was replaced with an Arduino which in turn was given ethernet connectivity via a LANTRONIX XPort serial ethernet module. This assigns the Furby an IP address which can then be accessed through a script or via a web interface. Now we want to see someone combine this idea with the arduino that sings “Daisy Bell” to make the ultimate in creepy new email notifiers.

Gameboy Foot Controller

August 31, 2009 by 12 Comments

[youtube=http://www.youtube.com/watch?v=lQdqudTzyBs]

[Joey] sent us a link to the newest version of his Gameboy foot controller. In the video above, you can see how he uses it to control the loops in the background while he plays his guitar through an 8-bit filter. That is an old video, using the previous version. He tells us that several gameboys were used in the construction. At one point, he had to replace the guts because the music was so loud it knocked his equipment over and destroyed it. We can’t help but feel just a tiny bit of excitement as memories of renting a NES cartridge for the weekend fill our heads when we hear these riffs. His music isn’t too bad either. There is a growing crowd of people that support “chip music”. You can see what looks like a decent sized gathering enjoying a show with a little bit of a history lesson after the break.

[This video, and the original version of the controler were posted about a year ago, good catch commenters]

Continue reading “Gameboy Foot Controller” →

Cheap Wireless For Microcontrollers

August 30, 2009 by 44 Comments

hr_RF_circuit

Everybody loves microcontrollers, including the Arduino, allowing you to create whatever you imagine. That is unless you want to hack together something wireless. Originally you had to rely on the expensive XBee protocol or other wireless options, but no longer. Hobby Robotics found an extremely cheap transmitter and receiver and wrote a quick guide for wiring them up to an Arduino. Now your wireless projects can come to life, as long as you are within 500 feet and don’t mind 2400bps; minor trade offs compared to the gains of wireless freedom. Final note: You aren’t limited to Arduino, we would love to see someone modify this to work with a PIC or other microcontroller.

Lego IPod Hacking Robot

August 30, 2009 by 14 Comments

800px-Nanotron-3000-farthen-1

The Linux4nano project has been working to port the Linux kernel onto the iPod Nano along with other iPods in general. Although the iPodLinux project has had luck with some older iPods, newer models protect firmware updates with encryption. One of the ways they plan on running code on the device is through a vulnerability in the notes program; it causes the processor to jump to a specific instruction and execute arbitrary code. To take advantage of this, they first need to figure out where their injected code ends up in the memory. Currently, they are testing every memory location by painstakingly loading in a bogus note and recording its effect. Each note takes about a minute to test and they have tens of thousands of addresses to check over several devices.

Continue reading “Lego IPod Hacking Robot” →

Your Music In Rock Band 2

August 30, 2009 by 9 Comments

reaperrockband_t

[Peter Kirn] over at Create Digital Music takes an in depth look at the process of adding your own music to Rock Band 2. This involves using REAPER audio production software, uploading your work via the XNA Creators’ Club, and then playing the fresh track on an Xbox 360. Both REAPER and the XNA Club cost money, and the total price comes out somewhere between $100-$160. The process is now in closed beta but a wider beta is expected in September followed by a full release in October.