How To Build A Small Solar Power System

December 30, 2023 by Jenny List 41 Comments

We live in an exciting time with respect to electrical power, one in which it has never been easier to break free from mains electricity, and low-frequency AC power in general. A confluence of lower-power appliances and devices using low-voltage external switch-mode supplies, readily available solar panels and electronic modules, and inexpensive high-capacity batteries, means that being your own power provider can be as simple as making an online order.

But which parts should you choose? Low Tech Magazine has the answer, in the form of a guide to building a small solar power system. The result is an extremely comprehensive guide, and though it’s written for a general audience there’s still plenty of information for the Hackaday reader.

Perhaps the most important part is that it’s demystifying the subject, there in front of us are a set of pretty straightforward recipes for personal power. The computer this is being written on spends a significant proportion of its time on the road with the ever-present company of a very hefty USB-C power pack for example, and the realization that a not-too-expensive solar panel and USB PD source could lessen the range anxiety and constant search for a train seat with a socket for a writer on the move is quite a powerful one.

Take a look and see whether your life could use bit of inexpensive off-grid power, meanwhile we’re quite pleased that the USB-C PD standard has eased some of the DC problems we expressed frustration at back in 2016.

Making The Case For Wooden Wind Turbines With Swedish Modvion

December 28, 2023 by Maya Posch 37 Comments

Inside shot of the Modvion wooden wind turbine tower.

Modern-day wind turbines are constructed using mostly concrete and steel, topped by the fiberglass composite blades mounted to the nacelle that houses the gearbox and generator, along with much of the control systems. With the ever increasing sizes of these turbines transporting the components to the installation location is a harrowing task, something which Swedish company Modvion claims to improve upon with its wooden tower elements that come mostly packaged flat, for on-site assembly. The BBC recently took a look at the first of these partially wooden wind turbine towers. At 105 meters tall, it features a standard V90-2.0MW turbine and blades.

Rather than using concrete slabs at the base with steel tower segments on top, or a fully steel tower like with most wind turbines, Modvion uses segments of layered wood which it calls ‘the module‘. These are assembled out of 144 layers of 3 mm thick spruce, with ring segments assembled on-site. This means that multiple of these modules can be stacked onto a standard truck with no concerns that come with oversized transports. According to Modvion these wooden towers should last about the same number of years as their steel counterparts. Continue reading “Making The Case For Wooden Wind Turbines With Swedish Modvion” →

3D Printing With Plastic Cutlery

December 25, 2023 by Al Williams 18 Comments

How many plastic spoons, knives, and forks do you think we throw away daily? [Stefan] noted that the compostable type is made from PLA, so why shouldn’t you be able to recycle it into 3D printing stock? How did it work? Check it out in the video below.

[Stefan] already has a nice setup for extruding filament. However, unsurprisingly, it won’t accept spoons and forks directly. A blender didn’t help, so he used an industrial plastic shredder. It reduced the utensils to what looked like coarse dust, which he then dried out. After running it through the extruder, the resulting filament was thin and brittle. [Stefan] speculates the plastic was set up for injection molding, but it at least showed the concept had merit.

In a second attempt, he cut the ground-up utensils with fresh PLA in equal measures. That is, 50% of the mix was recycled, and half was not. That made much more usable filament. So did a different brand of compostable plasticware.

The real test was to take dirty plasticware. This time, he soaked utensils in tomato sauce overnight. He cleaned, dried, and shredded the plastic. This time, he used 20% new PLA and some pigment, as well. We aren’t sure this is worth the effort simply on economics, but if you are committed to recycling, this might be worth your while.

It always seems like it should be easy to extrude filament. Until you try to do it, of course. Recycling plastic bottles is especially popular.

Continue reading “3D Printing With Plastic Cutlery” →

Saving The Planet With Carefully Cut Paper

December 22, 2023 by Kristina Panos 28 Comments

You may not think much of origami or its cousin-with-cutouts kirigami, but the latter could (and already is) helping to save the planet. But let’s back up a bit.

Most readers will be familiar with origami, the Japanese art of folding paper. But there is also kirigami, which uses a series of cuts to produce 3D shapes from 2D stock. Turns out that if you cut paper just right, you can turn it into highly-recyclable packaging that even interlocks with itself, negating the need for folding or even tape.

The video after the break takes a look at 3M’s Scotch Cushion Lock™ protective wrap through the eyes of its inventor, Tom Corrigan. It all started when 3M wanted to create a self-assembling box from a flat piece of cardboard.

So far, that particular invention hasn’t come to fruition, but after many long nights with paper and X-Acto knives, Tom came up with a honeycomb design with strong vertical walls that absorb energy much like bubble wrap or packing peanuts. The toothiness of each honeycomb wall adds height which adds strength, and allows the packaging to interlock with itself.

Not only is this packaging easier to recycle, it takes up way less space than other packaging alternatives. Once expanded, a 1,000 square foot roll of this stuff is equal to 2,500 square feet of bubble wrap, which constitutes about a dozen rolls.

Now, what to do about all that expanded polystyrene packaging still out there? With the right tool, you can turn it into insulation.

Continue reading “Saving The Planet With Carefully Cut Paper” →

A series of plates and tubes sits in a tank of water. The plates are square with what looks to be a white coating.

Desalinating Water With The Sun

December 21, 2023 by Navarre Bartz 12 Comments

Getting fresh water from salt water can be difficult to do at any kind of scale. Researchers have developed a new method of desalinating water that significantly reduces its cost. [via Electrek]

By mimicking the thermohaline circulation of the ocean, the researchers from MIT and Shanghai Jiao Tong University were able to solve one of the primary issues with desalination systems, salt fouling. Using a series of evaporator/condenser stages, the seawater is separated into freshwater and salt using heat from the sun.

Evaporating water to separate it from salt isn’t new, but the researchers took it a step further by tilting the whole contraption and introducing a series of tubes to help move the water along and create eddy currents. These currents help the denser, saltier water move off of the apparatus and down deeper into the fluid where the salt doesn’t cause an issue with the device’s operation. The device should have a relatively long lifetime since it has no moving parts and doesn’t require any electricity to operate.

The researchers believe a small, suitcase-sized device could produce water for a family for less than the cost of tap water in the US. The (paywalled) paper is available from Joule.

If you’re curious about other drinking water hacks, check out this post on Re-Imagining the Water Supply or this previous work by the same researchers.

Tesla’s Plug Moves Another Step Closer To Dominance

December 21, 2023 by Navarre Bartz 46 Comments

Charging an EV currently means making sure you find a station with the right plug. SAE International has now published what could be the end to the mishmash of standards in North America with the J3400 North American Charging Standard.

The SAE J3400TM North American Charging Standard (NACS) Electric Vehicle Coupler Technical Information Report (TIR), which just rolls off the tongue, details the standard formerly only available on Tesla vehicles. We previously talked about the avalanche of support from other automakers this year for the connector, and now that the independent SAE standard has come through, the only major holdout is Stellantis.

Among the advantages of the NACS standard over the Combined Charging System (CCS) or CHAdeMO is a smaller number of conductors given the plug’s ability to carry DC or AC over the same wires. Another benefit is the standard using 277 V which means that three separate Level 2 chargers can be placed on a single 3-phase commercial line with no additional step down required. Street parkers can also rejoice, as the standard includes provisions for lampost-based charger installations with a charge receptacle plug instead of the attached cable required by J1772 which leads to maintenance, clutter, and ADA concerns.

Now that J3400/NACS is no longer under the purview of a single company, the Federal Highway Administration has announced that it will be looking into amending the requirements for federal charger installation subsidies. Current rules require CCS plugs be part of the installation to qualify for funds from the Bipartisan Infrastructure Bill.

If you want to see how to spice up charging an EV at home, how about this charging robot or maybe try fast charging an e-bike from an electric car plug?

Recycling Batteries With Bacteria

December 18, 2023 by Navarre Bartz 6 Comments

Vehicle battery recycling is going to be a big deal with all the electric cars hitting the roads. What if you could do it more effectively with the power of microbes? (via Electrek)

“Li-ion” vehicle batteries can be any of a number of different chemistries, with more complex cathode makeups, like NCM (LiNi_xMn_yCo_1-x-yO₂), being understandably more complex to separate into their original constituents. Researchers and companies in the industry are hoping to find economically-viable ways to get these metals back for both the environmental and economic benefits a closed loop system could provide.

Researchers in the UK developed a method using two species of bacteria to precipitate Ni, Mn, and Co from the liquid leached from cathodes. Li remained in the liquid where it could be processed separately like that obtained in Li brine. Mn was precipitated first by S. oneidensis MR-1, and a following step removed Ni and Co with D. alaskensis G20. The researchers report that Ni and Co show promise for further separation via biological methods, but more research is required for this step.

If you’re looking for some more interesting ways bacteria can be harnessed for the energy system, checkout this microbial fuel cell, another using soil, and an enzyme derived from bacteria that can pull electricity from thin air.