Retrotechtacular: The Bell Laboratory Science Series

August 9, 2017 by Dan Maloney 8 Comments

For those of a certain vintage, no better day at school could be had than the days when the teacher decided to take it easy and put on a film. The familiar green-blue Bell+Howell 16mm projector in the center of the classroom, the dimmed lights, the chance to spend an hour doing something other than the normal drudgery — it all contributed to a palpable excitement, no matter what the content on that reel of film.

But the best days of all (at least for me) were when one of the Bell Laboratory Science Series films was queued up. The films may look a bit schlocky to the 21st-century eye, but they were groundbreaking at the time. Produced as TV specials to be aired during the “family hour,” each film is a combination of live-action for the grown-ups and animation for the kiddies that covers a specific scientific topic ranging from solar physics with the series premiere Our Mr. Sun to human psychology in Gateways to the Mind. The series even took a stab at explaining genetics with Thread of Life in 1960, an ambitious effort given that Watson and Crick had only published their model of DNA in 1953 and were still two years shy of their Nobel Prize.

Produced between 1956 and 1964, the series enlisted some really big Hollywood names. Frank Capra, director of Christmas staple It’s a Wonderful Life, helmed the first four films. The series featured exposition by “Dr. Research,” played by Dr. Frank Baxter, an English professor. His sidekick was usually referred to as “Mr. Fiction Writer” and first played by Eddie Albert of Green Acres fame. A list of voice actors and animators for the series reads like a who’s who of the golden age of animation: Daws Butler, Hans Conried, Sterling Halloway, Chuck Jones, Maurice Noble, Bob McKimson, Friz Freleng, and queen and king themselves, June Foray and Mel Blanc. Later films were produced by Warner Brothers and Walt Disney Studios, with Disney starring in the final film. The combined star power really helped propel the films and help Bell Labs deliver their message.

Continue reading “Retrotechtacular: The Bell Laboratory Science Series” →

Books You Should Read: The Idea Factory

July 20, 2017 by Mike Szczys 27 Comments

You’ve heard of Bell Labs, but likely you can’t go far beyond naming the most well-known of discoveries from the Lab: the invention of the transistor. It’s a remarkable accomplishment of technological research, the electronic switch on which all of our modern digital society has been built. But the Bell Labs story goes so far beyond that singular discovery. In fact, the development of the transistor is a microcosm of the Labs themselves.

The pursuit of pure science laid the foundation for great discovery. Yes, the transistor was conceived, prototyped, proven, and then reliably manufactured at the Labs. But the framework that made this possible was the material researchers and prototyping ninjas who bridged the gap between the theory and the physical. The technology was built on what is now a common material; semiconducting substances which would not have been possible without the Labs refinement of the process for developing perfectly pure substances reliably doped to produce the n-type and p-type substances that made diode and transistor possible.

Continue reading “Books You Should Read: The Idea Factory” →

Retrotechtacular: The Transistor (1953 Film)

May 29, 2017 by Jenny List 17 Comments

If we cast our minds back to the early years of the transistor, the year that is always quoted is 1947, during which a Bell Labs team developed the first practical germanium point-contact transistor. They would go on to be granted the Nobel Prize for their work in 1956, but the universal adoption of their invention was not an instantaneous process. Instead there would be a gradual change from vacuum to solid state that would span the 1950s and the 1960s, and even in the 1970s you might still have found mainstream devices on sale containing vacuum tubes.

First point contact transistor via kasap3

To speed up this process, Bell Labs made every effort to publicize their invention. Thus we come to our subject today, their 1953 publicity film The Transistor, in which the electronics industry of the era is described and how each part of it might revolutionize by the transistor is laid out.

We start with a look at a selection of electronic components, among which are a few transistors. The point contact device is already described as superceded by the junction transistor, but as well as those two we are shown a phototransistor and a junction tetrode, a now-obsolete design that had two base connections.

Unexpectedly we don’t dive straight into the world of transistors, but take a look back at the earlier years of the century to the development of vacuum electronics. We’re taken through the early development and operation of vacuum tubes, then their use in long-distance radio communications, through the advent of electronics in mass entertainment, and finally into the world of radar and microwave links. Only then do we return to the transistor, with a posed shot of [John Bardeen], [William Shockley], and [Walter Brattain] hard at work in a lab. The merits of the transistor as opposed to the tube are then set out, though we can’t help wondering whether they have confused a milliwatt and a microwatt when they describe the transistor as requiring only a millionth of a watt to operate.

Continue reading “Retrotechtacular: The Transistor (1953 Film)” →

Retrotechtacular: The Incredible Machine

December 8, 2016 by Elliot Williams 21 Comments

They just don’t write promotional film scripts like they used to: “These men are design engineers. They are about to engage a new breed of computer, called Graphic 1, in a dialogue that will test the ingenuity of both men and machine.”

This video (embedded below) from Bell Labs in 1968 demonstrates the state of the art in “computer graphics” as the narrator calls it, with obvious quotation marks in his inflection. The movie ranges from circuit layout, to animations, to voice synthesis, hitting the high points of the technology at the time. The soundtrack, produced on their computers, naturally, is pure Jetsons.

Highlights are the singing “Daisy Bell” at 9:05, which inspired Stanley Kubrick to play a glitchy version of the track as Dave is pulling Hal 9000’s brains out, symbolically regressing backwards through a history of computer voice synthesis which at that point in time was the present. (Whoah!)
Continue reading “Retrotechtacular: The Incredible Machine” →

Retrotechtacular: Ma Bell’s Advanced Mobile Phone Service (AMPS)

December 2, 2014 by Kristina Panos 14 Comments

This gem from the AT&T Archive does a good job of explaining the first-generation cellular technology that AT&T called Advanced Mobile Phone Service (AMPS). The hexagon-cellular network design was first conceived at Bell Labs in 1947. After a couple of decades spent pestering the FCC, AT&T was awarded the 850MHz band in the late 1970s. It was this decision coupled with the decades worth of Bell System technical improvements that gave cellular technology the bandwidth and power to really come into its own.

AT&T’s primary goals for the AMPS network were threefold: to provide more service to more people, to improve service quality, and to lower the cost to subscribers. Early mobile network design gave us the Mobile Service Area, or MSA. Each high-elevation transmitter could serve a 20-mile radius of subscribers, a range which constituted one MSA. In the mid-1940s, only 21 channels could be used in the 35MHz and 150MHz band allocations. The 450MHz band was introduced in 1952, provided another 12 channels.

The FCC’s allocation opened a whopping 666 channels in the neighborhood of 850MHz. Bell Labs’ hexagonal innovation sub-divided the MSAs into cells, each with a radius of up to ten miles.

The film explains quite well that in this arrangement, each cell set of seven can utilize all 666 channels. Cells adjacent to each other in the set must use different channels, but any cell at least 100 miles away can use the same channels. Furthermore, cells can be subdivided or split. Duplicate frequencies are dealt with through the FM capture effect in which the weaker signal is suppressed.

Those Bell System technical improvements facilitated the electronic switching that takes place between the Mobile Telephone Switching Office (MTSO) and the POTS landline network. They also realized the automatic control features required of the AMPS project, such as vehicle location and automatic channel assignment. The film concludes its lecture with step-by-step explanations of inbound and outbound call setup where a mobile device is concerned.

Continue reading “Retrotechtacular: Ma Bell’s Advanced Mobile Phone Service (AMPS)” →

Retrotechtacular: The Voder From Bell Labs

August 12, 2014 by Kristina Panos 36 Comments

This is the under-the-hood view of the keyboard for the Voder (Voice Operating Demonstrator), the first electronic device capable of generating continuous human speech. It accomplishes this feat through a series of keys that generate the syllables, plosives, and affricatives normally produced by the human larynx and shaped by the throat and tongue. This week’s film is a picture montage paired with the audio from the demonstration of the Voder at the 1939 World’s Fair.

The Voder was created by one [Homer Dudley] at Bell Laboratories. He did so in conjunction with the Vocoder, which analyzes human-generated speech for encrypted transfer and re-synthesizes it on the other end. [Dudley] spent over 40 years researching speech at Bell Laboratories. His development of both the Voder and the Vocoder were instrumental in the SIGSALY project which aimed to deliver encrypted voice communication to the theatres of WWII.

Continue reading “Retrotechtacular: The Voder From Bell Labs” →

VCF East: PR1ME And AT&T Unix Boxes

April 8, 2014 by Brian Benchoff 44 Comments

unix

At the Vintage Computer Festival last weekend, there was a wonderful representation of small 8 and 16-bit home computers from the 80s, an awful lot of PDP and VAX-based minicomputers, and even some very big iron in the form of a UNIVAC and a Cray. You might think this is a good representation of computing history, but there was actually a huge gap in the historical reality. Namely, workstations and minicomputers that weren’t made by DEC.

[Ian Primus] was one of the very few people to recognize this shortcoming and brought his PRIME minicomputer. This was a huge, “two half racks, side by side” computer running PRIMOS, an operating system written in FORTRAN. Of course this made it extremely popular with engineering teams, but that doesn’t mean [Ian] can’t have fun with it. He had two terminals set up, one running Dungeon (i.e. Zork pre-Infocom) and a text-based lunar lander game.

Because the VCF East is held in New Jersey, it’s probably no surprise a few vintage AT&T Unix boxes showed up. [Anthony Stramaglia] brought in a few very cool vintage Unix workstations, dating from the early to mid 80s. In the video, he shows off two AT&T boxes. The first is a UNIX PC, containing a 68010 clocked at a blistering 10 MHz. Next up is the UNIX PC’s bigger brother, the 3B2 400. This is the workstation found on just about every desk at Bell Labs in the 80s, meaning this is the same computer [Ken Thompson] and [Dennis Ritchie] used for their work on UNIX.

Continue reading “VCF East: PR1ME And AT&T Unix Boxes” →