Security Flaw Bypasses IPhone Lock Screen

It looks like the iPhone lock screen provides just a marginal level of protection. [Jordand321] discovered a key combination that opens the contact app on a locked iPhone. Just tap the emergency call button, enter the pound sign three times (###), then tap call and immediately tap the lock key on the top of the phone. If this is confusing just look at the video after the break to see how it’s done.

You don’t get access to everything on the device. But this does give an attacker access to all of your contact data and allows that person to make any calls they desire.

Continue reading “Security Flaw Bypasses IPhone Lock Screen” →

Tanks Treads For Your Next Robot

If you ever wanted to incorporate tank treads into one of your build you should check out this guide. The method shown above is our favorite, which uses rubber fuel line hose and #10 machine bolts to hold together two lengths of hollow-pin roller chain. You can see the drive sprocket is keyed into the outer length of chain but the wheels that distribute the vehicle’s weight rest on the rubber tubing. You’ll also find details on building hinged track, molded track, plastic conveyor track, treadmill track, and bicycle chain construction. This should cut down on development time when you finally get around to making that paintball tank.

[Thanks BoKu]

Ethernet Connection Using Capacitive Coupling

Wanting to save space and weight on his project build [Florin] set out to find a way to add Ethernet connectivity without the magnetics. His ill-advised first try involved directly coupling two switches, frying both in the process. After some research he found that Ethernet hardware manufacturers have considered the need for devices without the magnetics and there are several application notes available on the subject. [Florin] followed the information that Realtek has for their devices and learned that they can be couple capacitively. After depopulating the magnetics from a second pair of switches he wired up some resistor-capacitor networks on a breadboard and got the connecting to work.

PC Game Controller With A Touch Of Class

The above is a specially designed game controller made by [Giorgos] solely for the RTS game Men Of War (now that’s dedication to a game). [Giorgos] started off with a rough breadboard and 11 buttons. Slowly overtime he included a joystick, countdown timers, and the wonderfully lit case. Under the hood is a couple of PIC microcontrollers multiplexing the switches, LEDs, timers, and also interfacing with the computer via how is it not dead yet PS/2 port. The build log is a very detailed read and well worth it, even if you’re not planning on making a custom controller. [Ben Heck] better watch out, there is a new controller making enthusiast on the loose.

RC Controlled Camera Takes Intimate Video Of Rodents

[Leor] wanted to take some video of the wildlife in his yard, like this chipmunk or some hummingbirds, but every time he tried to get close it scared them away. His solution was to rig up a cheap video recorder to be radio controlled (PDF). The donor camera was a cheap SD card based eBay purchase that takes 720×480 video. [Leor] removed the SMD switches from the recorder’s PCB and wired up a 4066 quad bi-lateral switch IC in its place. An RC toy car donated the receiver transmitter pair. The receiver signals are monitored by an AVR microcontroller which translates the commands in a proper set of button presses for the video. What you get is a controller that and turn the camera on and set to the proper mode, and the ability to start and stop the recording.

We’ve got some pics of the hardware after the break, and [Leor] posted a bit of the chipmunk video for your enjoyment.

Continue reading “RC Controlled Camera Takes Intimate Video Of Rodents” →

Gas Containment For Laser Cutters

Tired of breathing all the noxious fumes your laser cutter puts out? Yeah… we don’t have a laser cutter either. But [Jeri Ellsworth] does and she needed a way to evacuate off-gases generated during cutting so that they don’t damage the laser cutter, or her lungs. What she came up with is a containment box that attaches to a pump system.

The problem is that you want to keep the gases away from the laser cutter hardware but you still need to be able to shoot the laser at your work material. Her clever solution is to use a silicone wafer like the ones with which she makes integrated circuits. They allow the infrared laser to pass through without being chopped in half. What you see in the image above is a red box with the round wafer in the center. Near the bottom of the image is a clear window so you can see what’s going on with your work piece. But to get the full idea you need to watch the video embedded after the break.

We can’t help but think she’s building this in preparation for some more chemistry hacking.

Continue reading “Gas Containment For Laser Cutters” →

Firesheep: Promoting Privacy In A Scary Way

Often, software hackers are the activists that push software giants towards updating vulnerable applications. In todays example, [Eric Butler] is pushing Facebook, Twitter, Flickr, and more all at the same time. By creating a user script-kiddie friendly extension for Firefox, he has allowed just about anyone to sniff unsecured connections on public Wi-Fi access points and log into these unprotected accounts.

Right now the extension is available for Windows and Mac, with a Linux port coming soon. Temporarily, the best way for a user to avoid getting taken advantage of would be to not use these social networking sites on a public connection, or to implement a secure proxy for these connections that would keep your data safe. Hopefully these websites will have a quick rebuttal that allows for security without workarounds. With all of the bad press they are recieving, they certainly have incentive to.

Are there any software or security buffs out there? We would love to see someone port this to an iPhone or Android app that could check and log open Wi-Fi points. We’ll leave the foot work to the experts out there, but do be sure to give us a heads up if anyone manages to make it happen, okay?