MINI’s Augmented Reality Ad

miniaugmented

We were surprised last month when we saw augmented reality being done completely in flash. It hasn’t taken too long to go mainstream though. MINI has incorporated it into a recent German language magazine ad campaign. The fiduciary marks actually work quite well with MINI’s established ad format. Visit the ad’s URL and hold the magazine up to the webcam and a 3D model of the MINI Cabrio will appear. They have a PDF of the ad that you can print and use if you don’t have the original. Unfortunately, it doesn’t seem to have cross-platform support.

[via Autoblog]

Cordless Drill Overhaul

drill_upgrade

[Alexander.m] shows us how to do a major overhaul on a cordless drill, replacing pretty much everything but the case. He needed some more power, but found the price tag of the bigger drills to be prohibitive. He opted for a more hacked together approach and used a  24 volt 1.4 hp hobby motor as a drive. He had to make a custom enclosure for the batteries too. The final result may not be the prettiest thing in the world, with that giant battery pack on the bottom, but it probably gets the job done pretty well and cost less than half of what a new one would have.

Disposable Camera Nixie Tube Driver

nixie_camera

Disposable cameras are quite cheap, and include circuitry that produces very high voltages. Because of this, they have been harvested for many projects. We’ve seen them used for coil guns and large high voltage power supplies, even for fixing rechargeable batteries that won’t charge. The latest in the long list of uses is to create nixie tube drivers. [the_don125] shows us how to use a single disposable camera to power 2 to 3 medium sized Nixie tubes. Be careful, as we said before, this project deals with high voltage.

Baby Twitters Via Kicks

twitter-1

[Corey Menscher] built the Kickbee while attending ITP this Fall. It monitors his pregnant wife’s belly and updates Twitter, a microblogging service, every time the baby kicks. The device makes everyone aware of the baby’s movement, not just the expectant mother. It can also log the baby’s activity to monitor development. The sensors are piezos held in place with an elastic band. They’re connected to an Arduino Mini which connects to a host computer using a BlueSMIRF bluetooth module. The host Mac does the logging and twittering.

This is one of the many projects on display at the ITP Winter Show.

[Thanks, @readiness via Boing Boing]

How-to: Programmable Logic Devices (CPLD)

Complex programmable logic devices (CPLDs) contain the building blocks for hundreds of 7400-serries logic ICs. Complete circuits can be designed on a PC and then uploaded to a CPLD for instant implementation. A microcontroller connected to a CPLD is like a microcontroller paired with a reprogrammable circuit board and a fully stocked electronics store.

At first we weren’t sure of the wide appeal and application of CPLDs in hobbyist projects, but we’ve been convinced. A custom logic device can eliminate days of reading datasheets, finding the ideal logic IC combination, and then waiting for chips to arrive. Circuit boards are simpler with CPLDs because a single chip with programmable pin placement can replace 100s of individual logic ICs. Circuit mistakes can be corrected by uploading a new design, rather than etching and stuffing a new circuit board. CPLDs are fast, with reaction times starting at 100MHz. Despite their extreme versatility, CPLDs are a mature technology with chips starting at $1.

We’ve got a home-etchable, self programming development board to get you started. Don’t worry, this board has a serial port interface for working with the CPLD, and doesn’t require a separate (usually parallel port) JTAG programmer.

Continue reading “How-to: Programmable Logic Devices (CPLD)” →