Hackaday Links: May 3, 2020

May 3, 2020 by Dan Maloney 7 Comments

In a sign of the times, the Federal Communications Commission has officially signed off on remote testing sessions for amateur radio licensing in the United States. Testing in the US is through the Volunteer Examiner Coordinator program, which allows teams of at least three Volunteer Examiners to set up in-person testing sessions where they proctor amateur radio licensing exams. The VEs take their jobs very seriously and take pride in offering exam sessions on a regular schedule, so when social distancing rules made their usual public testing venues difficult to access, many of them quickly pivoted to remote testing using teleconferencing applications. Here’s hoping that more VEs begin offering remote testing sessions.

Another aspect of life changed by COVID-19 and social distancing rules has been the simple pleasure of a trip to the museum. And for the museums themselves, the lack of visitors can be catastrophic, both in terms of fulfilling their educational and research missions and through the lack of income that results. To keep the flame alive in a fun way, Katrina Bowen from The Centre for Computing History in Cambridge has recreated her museum in loving detail in Animal Crossing: New Leaf. For being limited to what’s available in the game, Katrina did a remarkable job on the virtual museum; we especially like the Megaprocessor wallpaper. She even managed to work in that staple last stop of every museum, the gift shop.

To the surprise of few, “spatial computing” startup Magic Leap has announced that it is laying off half its workforce as it charts a new course. The company, which attracted billions in funding based on its virtual retinal display technology, apparently couldn’t sell enough of their Magic Leap One headsets to pay the bills. The company is swiveling to industrial users, which honestly seems like a better application for their retinal display technology than the consumer or gaming markets.

And finally, as if 2020 hasn’t been weird enough already, the Department of Defense has officially released videos of what it calls “unidentified aerial phenomena.” These videos, taken from the head-up displays of US Navy fighter jets, had previously been obtained by private parties and released to the public. Recorded between 2004 and 2015, the videos appear to show objects that are capable of extremely high-speed flight and tight maneuvers close to the surface of the ocean. We find the timing of the release suspicious, almost as if the videos are intended to serve as a distraction from the disturbing news of the day. We want to believe we’re not alone, but these videos don’t do much to help.

Hardware Hacker’s Marie Kondo: How Many LM386s Is Too Many?

May 2, 2020 by Elliot Williams 57 Comments

We’re running a contest on Making Tech at Home: building projects out of whatever you’ve got around the house. As a hacker who’s never had a lab outside of my apartment, house, or hackerspace, I had to laugh at the premise. Where the heck else would I hack?

The idea is that you’re constrained to whatever parts you’ve got on hand. But at the risk of sounding like Scrooge McDuck sitting on a mountain of toilet paper, I’ve got literally hundreds of potentiometers in my closet, a couple IMUs, more microcontrollers than you can shake a stick at, and 500 ml of etching solution waiting for me in the bathroom. Switches, motors, timing belts, nichrome wire…maybe I should put in an order for another kilogram of 3D printer filament. In short, unless it’s a specialty part or an eBay module, I’m basically set.

But apparently not everyone is so well endowed. I’ve heard rumors of people who purchase all of the parts for a particular project. That ain’t me. The guru of household minimalism asks us to weigh each object in our possession and ask “does it spark joy?”. And the answer, when I pull out the needed 3.3 V low-dropout regulator and get the project built now instead of three days from now, is “yes”.

And I’m not even a hoarder. (I keep telling myself.) The rule that keeps me on this side of sanity: I have a box for each type of part, and they are essentially fixed. When no more motors fit in the motor box, no more motors are ordered, no matter how sexy, until some project uses enough of them to free up space. It’s worked for the last 20 years, long before any of us had even heard of Marie Kondo.

So if you also sit atop a heap of VFD displays like Smaug under the Lonely Mountain, we want to see what you can do. If you do win, Digi-Key is sending you a $500 goodie box to replenish your stash. But even if you don’t win, you’ve freed up space in the “Robot Stuff” box. That’s like winning, and you deserve some new servos. Keep on hacking!

Hackaday Podcast 065: Game Boy Hacks Galore, Cable Robo Elbow, Pi Cam Solargraphy, And The Deepest Sub Is Crushing It

May 1, 2020 by Mike Szczys 1 Comment

Hackaday editors Mike Szczys and Elliot Williams cover the hacks that made us happy over the past week. There’s an incredible cable-driven robotic elbow hack whose quality is only eclipsed by the fantastic explanation of how it works (like a block and tackle). Getting data like WiFi credentials into your embedded project may be just a blinking Android app away. Try your hand at digital solargraphy with creative use of f-stop and post processing. And Mike ogles an RC F-35 project while Elliot goes gaga for the deepest of all submarine designs.

Take a look at the links below if you want to follow along, and as always tell us what you think about this episode in the comments!

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (60 MB or so.)

Continue reading “Hackaday Podcast 065: Game Boy Hacks Galore, Cable Robo Elbow, Pi Cam Solargraphy, And The Deepest Sub Is Crushing It” →

This Week In Security: Firewall 0-day, Apple’s Response, And An Android Bluetooth Bug

May 1, 2020 by Jonathan Bennett 8 Comments

Sophos firewall appliances are actively being attacked by a 0-day exploit chain that originates with a SQL injection. That injection is a nasty one, as it can be launched from the WAN user portal. The observed attack used that vulnerability to inject a shell command into the device database, where it would eventually be run automatically. If you have an affected Sophos device, go check that the hotfix was automatically installed.

While the vulnerability was a bad one, Sophos’ response here is laudable. They publicly disclosed the attack less than 24 hours after they were notified of it’s existence in the wild, and began rolling a fix out within three days. Additionally, Sophos engineers did a really detailed write-up (linked above) giving us all the details of the attack. The hotfix that closes the vulnerability also attempts to clean up the infection, although there are some additional manual steps that are suggested if your device was compromised. Continue reading “This Week In Security: Firewall 0-day, Apple’s Response, And An Android Bluetooth Bug” →

3D Printering: Will A Resin Printer Retire Your Filament-based One?

April 30, 2020 by Donald Papp 25 Comments

Adding a resin printer to one’s workbench has never looked so attractive, nor been so affordable. Complex shapes with effortlessly great detail and surface finish? Yes, please! Well, photos make the results look effortless, anyway. Since filament-based printers using fused deposition modeling (FDM) get solid “could be better” ratings when it comes to surface finish and small detail resolution, will a trusty FDM printer end up retired if one buys a resin printer?

The short answer is this: for users who already use FDM, a resin-based stereolithography (SLA) printer is not likely to take over. What is more likely to happen is that the filament printer continues to do the same jobs it is good at, while the resin printer opens some wonderful new doors. This is partly because those great SLA prints will come at a cost that may not always justify the extra work.

Let’s go through what makes SLA good, what it needs in return, and how it does and doesn’t fit in with FDM.

Continue reading “3D Printering: Will A Resin Printer Retire Your Filament-based One?” →

Test Equipment, Shim Washers, And A 30 Year Old Space Telescope

April 29, 2020 by Al Williams 38 Comments

This year marks the 30th anniversary of the Hubble Space Telescope. When you see all the great pictures today, it is hard to remember that when it first launched, it was nearly a failure, taking fuzzy pictures. The story of how that problem was fixed while the telescope was whizzing through space is a good one. But there’s another story: how did a $1.5 billion satellite get launched with defective optics? After all, we know space hardware gets tested and retested and, typically, little expense is spared to make sure once a satellite is in orbit, it will work well for a long time.

The problem was with a mirror. You might think mirrors are pretty simple, but it turns out there’s a lot to know about mirrors. For astronomy, you need a first surface mirror which is different from your bathroom mirror which almost certainly reflects off the back of the glass. In addition, the mirrors need a very precise curve to focus light.

Continue reading “Test Equipment, Shim Washers, And A 30 Year Old Space Telescope” →

Greatest Keycaps And Where To Find Them

April 28, 2020 by Kristina Panos 25 Comments

Look at your keyboard. Do the keycaps excite you? That’s what we thought. You pound on that thing day in and day out. Shouldn’t it at least be attractive? Or even happiness-inducing? You don’t necessarily have to replace every single keycap to spark joy. When it comes to artisan keycaps, the point is to have something that stands out.

How about an Escape key that looks like a tall stack of flapjacks or a tiny, intricate cream puff? From a practical standpoint, how about a spiky Escape key that makes you think twice about rage quitting?

If you’re into games or anime, chances are good that there are more than enough artisan keycaps out there to keep you cash-poor for a while. The same goes for scrumptious foodstuffs with Cherry MX-compatible stems.

In this day and age, you can get just about any type of keycap you want, especially those encapsulating pop culture phenomena and fads. Yes there’s a fidget spinner keycap, and it’s adorable.

Continue reading “Greatest Keycaps And Where To Find Them” →