Through-hole Bus Pirate Kit From Fundamental Logic

bpv1ath

Fundamental Logic is selling a Bus Pirate kit and bare PCB based on our universal serial interface tool. They started with our serial port-based v1a hardware, and modified it to use all through-hole parts.  8pin DIP LP2951ACN/-3.3 switchable voltage regulators replace the surface mount TPS79650/33 that we used. The PIC is pre-programmed with our latest firmware, version 0f, which includes a bootloader for easy firmware updates through the serial port. Documentation includes illustrated assembly instructions.

Speaking of Bus Pirate goodness, we’re busy working on hardware V2. As astute readers may have already noticed, the final version of the Bus Pirate incorporates an FTDI USB->serial chip, and draws its power from the USB port. We also tackled the software-controlled pull-up resistor feature, and reduced the overall part count and cost. Best of all, we’re working to make assembled PCBs available with world-wide shipping. The how-to should be ready in a few weeks.

Containing Conficker

conficker

With all the noise about Conficker turning your computer into liquid hot magma on April 1st, there’s actually some positive news. Researchers from the HoneyNet Project have been following the worm since infections started in late 2008. They recently discovered an easy way to identify infected systems remotely. Conficker attempts to patch the MS08-067 vulnerability during infection. A flaw in the patch causes the machine to respond differently than both an unpatched system and an officially patched system. Using this knowledge, the team developed a proof of concept network scanner in python to find infected machines. You can find it in [Rich Mogull]’s initial post. [Dan Kaminisky] has packaged it as an EXE and has instructions for how to build the SVN version of Nmap, which includes the new signature. Other network scanner vendors are adding the code as well.

In conjunction with this detection code, the team has also released the whitepaper Know Your Enemy: Containing Conficker. It discusses ways to detect, contain, and remove Conficker. They’ve combined this with a tool release that covers Conficker’s dynamic domain generation among other things.

PSP As A Status Monitor

[Avi] sent in his PSP as a status monitor hack(zip). He’s using Lua on the PSP, so you have to install LuaPlayer. The computer side is written in python, so it should be cross platform. Last time we saw a psp as an extra monitor, it had more capabilities, but it was limited to Windows. You’ll find the Lua script as well as the python in the zip file. It’s a nice use for an extra psp.

Parts: Programmable Gain Amplifier (MCP6S26)

mcp6s26

Microchip’s MCP6S21/2/6/8 are programmable gain amplifiers that multiply an input voltage by a factor of 1, 2, 4, 5, 8, 10, 16, and 32. The MCP6S22/6/8 also have selectable input channels for working with different signal sources. The multiplication factor and input channel are configured through an SPI interface. This chip is useful for multiplying a small input signal, and selecting among several analog input sources. We demonstrate the six channel MCP6S26 below.

Continue reading “Parts: Programmable Gain Amplifier (MCP6S26)” →

Arduino + Wii Nunchuck + Servos

[youtube=http://www.youtube.com/watch?v=phcsDNOglLI]

[Yezzer] has posted a video of a cool little project he’s working on. He has interfaced the Arduino and the Wii Nunchuck to control some servos. He mounted a standard USB webcam on it for good measure. There isn’t a whole lot of information, but he does include a few links to code he modified for the project. The movement is quite natural looking and seems like it would be a cheap way to get some good animatronic controls started. This might actually be a great way to control a robot for the Crabfu challenge, if they ever have another one.

Update: As [dokument] points out in the comments below, it looks like we’ve seen a set up that could be almost identical in the past.

[via the Hack a Day Flickr pool]

ToorCamp Call For Papers/participation

toorcamp

We’ve been watching and waiting intently as ToorCamp comes together. It’s a four day hacker conference that will be held in a Washington state missile silo July 2nd-5th. While we’re excited about this debut event, its success depends entirely on those presenting. The call for papers is currently open and they’ve got a number of formats available: 20 and 50 minute talks and 1 and 2 day workshops. They’re also looking for people to organize campsites and are offering discounts for groups. We’re encouraging you to submit your talk since we’d love to see more hardware talks. You can follow @ToorCamp announcements on Twitter.

Automated Drum

snaredrum

A team of three PhD students constructed this ‘multi-mallet automatic drumming instrument (Madi)‘. Their Expressive Machines Musical Instruments site is dedicated to building instruments like this and they recently showed their work at the first annual Guthman Musical Instrument Competition. A ‘low-stakes X Prize’ for musical instruments. 25 applicants were chosen to show their unique musical instruments for $10K in prizes. We like the team’s Madi because it’s adapting a traditional instrument and then pushing it to the limit. It reminds us of the Crazy J mechatronic guitar from 2005. You can see a video of the Madi playing below.

Continue reading “Automated Drum” →