cloud

47 Articles

Drinkable Clouds Get You Second-Hand Drunk

April 7, 2017 by 30 Comments

While the rise of electronic cigarettes and vaping has led to many aggravated bystanders, an installation in Germany may have found a vapor of a different ilk. Rather than nicotine, this cloud of vapors is full of tequila which precipitates out into glasses (or people) who happen to be nearby.

The cloud generator uses ultrasonic devices to vibrate the tequila molecules until they form a fine mist. The mist is delivered outward towards the sculpture, where a delicious cloud forms. From there, the cloud literally rains tequila out into its original, drinkable tequila form. It appears to take a while to gather enough tequila from the cloud, though, so there is a convenient tap on the side that will dispense it without all the rigmarole.

Basically this is a nebulizer which is using tequila and dispersing the output rather than directing it. You’re unlikely to get a large enough gasp for inebriation, but technically there is an opportunity a risk here of becoming second-hand drunk.

The installing is an effort by the Mexican Tourism Board to encourage Germans to take a break from the rain in favor of visiting sunny Mexico, we’d have to say that the effort seems to be a success. Once there, hopefully any visitors will be able to enjoy a perfect margarita or two as well.

Make Any PC A Thousand Dollar Gaming Rig With Cloud Gaming

October 19, 2016 by 71 Comments

The best gaming platform is a cloud server with a $4,000 dollar graphics card you can rent when you need it.

[Larry] has  done this sort of thing before with Amazon’s EC2, but recently Microsoft has been offering a beta access to some of NVIDIA’s Tesla M60 graphics cards. As long as you have a fairly beefy connection that can support 30 Mbps of streaming data, you can play just about any imaginable game at 60fps on the ultimate settings.

It takes a bit of configuration magic and quite a few different utilities to get it all going, but in the end [Larry] is able to play Overwatch on max settings at a nice 60fps for $1.56 an hour. Considering that just buying the graphics card alone will set you back 2500 hours of play time, for the casual gamer, this is a great deal.

It’s interesting to see computers start to become a rentable resource. People have been attempting streaming computers for a while now, but this one is seriously impressive. With such a powerful graphics card you could use this for anything intensive, need a super high-powered video editing station for a day or two? A CAD station to make anyone jealous? Just pay a few dollars of cloud time and get to it!

Open Sesame, From A Galaxy Far, Far Away.

February 14, 2016 by 15 Comments

[TVMiller]’s description of his project is epic enough to deserve a literal copy-paste (something our readers often praise us about). In his own words,  “Having discovered several spare Midichlorians in my liquor cabinet, I trained and applied them to opening a large cumbersome gate. The FORCE motion travels through my inner what-nots and is translated by the Pebble Classic accelerometer toggling a command sent to the (Particle) Cloud (City) which returns to the Particle Photon triggering a TIP120 to fire a button on an existing RF transceiver. May the ridiculous hand gestures be with you, always.” Thus was born the Gate Jedi , and you’ll need exactly 47 Midichlorians, and some other trivial parts, to build one.

The Pebble watch hooks up to his android smart phone. A Pebble (android) app sends the accelerometer data to the Particle (previously called Spark) cloud service. From there, the data is pushed to the Photon IoT board which runs a few lines of code. Output from the Photon turns on a TIP120 power transistor, which in turn triggers the existing RF trans receiver that opens the Gate.

This looks way cooler than the Light Sabre hacks. Check out the video of him summoning the Force. And if you’d like to do more, try integrating gesture controls with this Pebble Watch hack that turns it into a home automation controller.

Continue reading “Open Sesame, From A Galaxy Far, Far Away.” →

Hackaday Links: December 20, 2015

December 20, 2015 by 16 Comments

If you don’t have a Raspberry Pi Zero right now, you’re not getting one for Christmas. Who would have thought a $5 Linux computer would have been popular, huh? If you’re looking for a new microcontroller platform you can actually buy, the Arduino / Genuino 101 is available in stores. This was released a few months ago, but it still looks pretty cool: DSP, BTLE, and a six-axis sensor.

If you don’t know [David], the Swede, you should. He’s the guy that launched a glider from a high altitude balloon and is one of the biggest advocates of tricopters. Now he bought an airplane wing for his front yard. It was an old Swedish air force transport aircraft being broken up for scrap. Simply awesome.

Chocolate chips. Now that the most obvious pun is out of the way, here’s how you make DIP8 cookie cutters.

[Barb] is over at the Crash Space hackerspace in LA, and she has a YouTube channel that goes over all her creations. This week, it’s a layered wood pendant constructed out of many layers of veneer. Take note of the 3M 77 spray glue used for the lamination and the super glue used as a clear, hard finish.

Star Wars was released and we have a few people digging through the repertoire to see what [John Williams] lifted for the new movie. Here’s musical Tesla coils playing the theme for the Force.

Flickr gives you a full gigabyte of storage, but only if you upload JPEGs, GIFs, and PNGs. That doesn’t prevent you from using Flickr as your own cloud storage.

We know two things about [Hans Fouche]: he lives in South Africa and he has a gigantic 3D printer. His latest creation is an acoustic guitar. It may not sound great, but that’s the quality of the recording. It may not play great, but he can fix that with some acetone vapor. It would be very interesting to see 3D printing used in a more traditional lutherie context; this printer could easily print molds and possibly even something to bend plywood tops.

Starting in 1990, [deater] would make a yearly Christmas-themed demo on his DOS box. You can really see the progression of technology starting with ANSI art trees written in BASIC, to an EGA graphical demo written with QBASIC to the last demo in 96 made with VGA, and SoundBlaster effects written in Turbo Pascal and asm.

Push Blood Pressure Data To The Cloud Via ESP8266

October 11, 2015 by 14 Comments

[Eduardo] contacted us about his success at connecting a blood pressure monitor to the web. He pulled this off by locating the chip responsible for storing the blood pressure data after being measured. It was a simple I2C EEPROM from which he dumped the data a sniffed communications with a 4 bit logic analyzer. [Eduardo] published all of his findings on that communication scheme so check out his post for more on that. The gist of it is that he implemented his reverse engineered protocol using an ESP8266, the ubiquitous cheap WiFi board that has become a go-to for web-connected anything like power monitors and underpowered but awesome server farms. Check out the Hackaday Dictionary entry for more on this board.

[Eduardo] is not the first on the scene with such a device, you can see a Withings device and a blipcare device available on Amazon. What this hack from [Eduardo] does provide is evidence of a much cheaper route for connecting vital medical data from a geographically distant, and perhaps technophobic family member. Lets take a walk down hypothetical lane, shall we? Uncle Bob in Albuquerque who doesn’t have any local family might be a good candidate for such a hacked device, everyone knows it’s like pulling teeth to get elderly family members to report some health information to loved ones… but with [Eduardo’s] hack it’s simple. Embed the hardware (assuming you know the login creds ahead of time) into a new BPM, send it to him as a gift, and Bob’s your uncle.

We haven’t seen too many blood pressure monitor hacks, but one entry from the Hackaday Prize dubbed “the pain machine” included monitoring the user’s blood pressure. We also covered an interesting hack on monitoring your heart rate with a piezo element.

A quick demo of [Edward’s] cuff is found below.

Continue reading “Push Blood Pressure Data To The Cloud Via ESP8266” →

Coffee Alarm

Alarm Notifies The Office When The Coffee Is Ready

July 24, 2015 by 12 Comments

[Stian] thought it would be nice if his coworkers could be electronically notified when the latest batch of coffee is ready. He ended up building an inexpensive coffee alarm system to do exactly that. When the coffee is done, the brewer can press a giant button to notify the rest of the office that it’s time for a cuppa joe.

[Stian’s] first project requirement was to activate the system using a big physical button. He chose a button from Sparkfun, although he ended up modifying it to better suit his needs. The original button came with a single LED built-in. This wasn’t enough for [Stian], so he added two more LEDs. All three LEDs are driven by a ULN2003A NPN transistor array. Now he can flash them in sequence to make a simple animation.

This momentary push button supplies power to a ESP8266 microcontroller using a soft latch power switch. When the momentary switch is pressed, it supplies power to the latch. The latch then powers up the main circuit and continues supplying power even when the push button is released. The reason for this power trickery is to conserve power from the 18650 li-on battery.

The core functionality of the alarm uses a combination of physical hardware and two cloud-based services. The ESP8266 was chosen because it includes a built-in WiFi chip and it only costs five dollars. The microcontroller is configured to connect to the WiFi network with the push of a button. The device also monitors the giant alarm button.

When the button is pressed, it sends an HTTP request to a custom clojure app running on a cloud service called Heroku. The clojure app then stores brewing information in a database and sends a notification to the Slack cloud service. Slack is a sort of project management app that allows multiple users to work on projects and communicate easier over the internet. [Stian] has tapped into it in order to send the actual text notification to his coworkers to let them know that the coffee is ready. Be sure to watch the demo video below. Continue reading “Alarm Notifies The Office When The Coffee Is Ready” →

Who’s Watching The Kids?

February 19, 2015 by 65 Comments

It wasn’t long ago that we saw the Echo bloom into existence as a standalone product from its conceptual roots as a smartphone utility. These little black columns have hardly collected their first film of dust on our coffee tables and we’re already seeing similar technology debut on the toy market, which causes me to raise an eye-brow.

There seems to be some appeal towards making toys smarter, with the intent being that they may help a child learn while they play. Fair enough. It was recently announced that a WiFi enabled, “Hello Barbie” doll will be released sometime this Fall. This new doll will not only be capable of responding to a child’s statements and questions by accessing the Internet at large, it will also log the likes and dislikes of its new BFF on a cloud database so that it can reference the information for later conversations. Neat, right? Because it’s totally safe to trust the Internet with information innocently surrendered by your child.

Similarly there is a Kickstarter going on right now for a re-skinned box-o-internet for kids in the shape of a dinosaur. The “GreenDino”, is the first in a new line called, CogniToys, from a company touted by IBM which has its supercomputer, Watson, working as a backbone to answer all of the questions a child might ask. In addition to acting as an informational steward, the GreenDino will also toss out questions, and upon receiving a correct answer, respond with praise.

Advancements in technology are stellar. Though I can see where a child version of myself would love having an infinitely smart robot dinosaur to bombard with questions, in the case of WiFi and cloud connectivity, the novelty doesn’t outweigh the potential hazards the technology is vulnerable to. Like what, you ask?

Whether on Facebook or some other platform, adults accept the unknown risks involved when we put personal information out on the Internet. Say for instance I allow some mega-corporation to store on their cloud that my favorite color is yellow. By doing so, I accept the potential outcome that I will be thrown into a demographic and advertised to… or in ten years be dragged to an internment camp by a corrupt yellow-hating government who subpoenaed information about me from the corporation I consensually surrendered it to.

The fact is that I understand those types of risks… no matter how extreme and silly they might seem. The child playing with the Barbie does not.

All worst case scenarios of personal data leakage and misuse aside, what happens when Barbie starts wanting accessories? Or says to their new BFF something like, “Wouldn’t we have so much more fun if I had a hot pink convertible?”