Wireless Painting

February 9, 2010 by Mike Szczys 18 Comments

[Tom Shannon] uses science as part of his art. One of his methods when painting is to use this radio controlled paint pendulum. He gave an interview at his studio, which we’ve embedded after the break, and goes into detail about this device. It has six different reservoirs that hold the paint colors. Each gravity-fed canister connects to a central nozzle with flexible tubing. The hand held control box has a slider for each color that moves a servo pinching each supply tube. This ingenuity keeps him creating even though Parkinson’s Disease has started to manifest itself with tremors in his hands.

It’s hard to make out the paintings seen above, but the ones on display in the video are pretty amazing. He mentions that anything can be loaded into the hoppers, including tomato sauce. Is anyone else thinking about large scale pizza constuction? This also reminds us of the mechanical bartenders we’ve seen in the past. Continue reading “Wireless Painting” →

IM-ME Screen Reverse Engineered

February 1, 2010 by Mike Szczys 3 Comments

[Dave] figured out the command set for the IM-ME terminal. It took a bit of sleuthing to get this pink plastic peripheral to give up these secrets. He used an oscilloscope to sniff out the SPI connections, then used a hacked IM-ME to capture the traffic from a factory-fresh unit. He managed to extrapolate how write data was being sent but he still couldn’t figure out how commands were differentiated from that data. With the info at hand he searched around the interwebs to find that the screen uses an ST7565S controller. Now he’s got custom firmware to make the LCD display do his bidding and we’re wondering what’s next?

Live High Altitude Balloon Launch

January 21, 2010 by Jakob Griffith 22 Comments

[Terry] is planning to launch his high altitude balloon within the next few days. As we’ve seen before he has gone for a general setup – GPS tracking, environment sensors including temperature and humidity and pressure, and 2 on board cameras – all with an expected height of about 100,000 feet. What makes this project unique is the transmission of live telemetry data to a Google Maps or Google Earth interface.

The planned launch date is Sunday the 24th about 00:00 UTC so long as the Civil Aviation Safety Approval for the launch is passed.

As a final note [Terry] wanted to let inspiring balloon launchers to check out the UK High Altitude Society – who have been an invaluable source of information.

AeroQuad – Build Your Own Quadcopter

January 15, 2010 by Mike Szczys 58 Comments

It hurts us to look at this quadcopter, agonizingly so when we watch the video after the break. That’s because we feel the unstoppable compulsion to build one. This four-rotor helicopter has a lot to be proud of; it features Gyro stabilization, Xbee remote control for very long distance operation, and computer interface for data graphing and calibration.

We like the quadcopter that we came across at CES but building one of our own is more fun than buying it ready-made. The pain we’re feeling is mostly in our pocketbook. To help ease the agony we scoured the parts list and the assembly instructions in order to get an estimate of what this might cost. We’re looking at around $415 plus shipping, not including transmitter and receiver for controlling it. Yep, that’s a sharp stabbing pain but we’re not sure we can just let it go.

Continue reading “AeroQuad – Build Your Own Quadcopter” →

LEGO Router Case Bests Factory Finish

January 13, 2010 by Mike Szczys 17 Comments

Stare at [Luke’s] LEGO router case; STARE AT IT! The router is nothing special, a WRT54GL that is fun to hack. We’ve seen it used as a robot, turned into a war driving box, and obviously this is where dd-wrt custom firmware started.

[Luke] designed the case in MLCAD and found a seller for the parts which came in just over $50. We think it’s much better looking than the stock case an if you used that for a different project, this is a way to replace it. We’ve embedded [Luke’s] assembly video after the break. If you like this case, take a look at his LEGO PC case as well.

Continue reading “LEGO Router Case Bests Factory Finish” →

Amazing Chassis Hacks

January 11, 2010 by Mike Szczys 11 Comments

[Crabfu] pulled off some great chassis work on top of a remote control drivetrain. His most recent build turns the tiny traveler into a lunar rover complete with passenger and a communications array. For this he’s sourced the parts from a toy but boosted the realism with hand-painted details that leave us in awe. His previous project sourced the body from a model truck kit. Once again, it’s the paint work that makes us envious of his skills.

Both projects conceal a Losi 1/24 scale micro rock crawler that provides for some incredible locomotion. See video of both builds after the break.

Continue reading “Amazing Chassis Hacks” →

Update: More Pink Wireless-terminal Hacking

January 6, 2010 by Mike Szczys 13 Comments

[Dave] poked around inside of an IM-ME wireless toy and compiled his findings. He read about the device when we covered it in November and picked up a couple to see what he could do. He patched into the debug port in the CC1110 processor and enabled it by performing a chip erase. He then began mapping out how the processor connects and communicates with the qwerty keyboard, the wireless radio, and the LCD screen. The board is full of test points which make the hardware easy to access. [Dave’s] experiments show that this hackable device is full of potential so let’s see what you can do!