How-to: The Bus Pirate V2 With USB

June 25, 2009 by Ian 32 Comments

buspiratev2goii450

Update, Saturday July 4th, 2009: All preorders are closed.

The Bus Pirate is a universal serial interface tool, we use it to test new chips without writing any code. It currently supports most serial protocols, including 1-Wire, I2C, SPI, JTAG, asynchronous serial, MIDI, and more. We added some other features we frequently need, like pulse-width modulation, frequency measurement, voltage measurement, bus sniffers, pull-up resistors, and switchable 3.3volt and 5volt power supplies.

The new v2 family adds USB power and connectivity to the best Bus Pirate design yet. We also reduced the part count and cost wherever possible. If you want to get your hands on some Bus Pirate USB goodness, Seeed Studio has assembled hardware for $30 (including worldwide shipping).

Read about the new design after the break.

Continue reading “How-to: The Bus Pirate V2 With USB” →

64 Synchronizing Fireflies

June 25, 2009 by Zach Banks 14 Comments

screenshot_007

[Alex] of tinkerlog created a set of 64 RGB fireflies that synchronize to blink all at once. We covered the kit earlier, but he has assembled a set of 64. Each firefly is independently controlled by an ATtiny13 that reads a phototransistor and lights up an RGB LED. The fireflies are programmed to blink a certain rate, but blink faster if they detect other blinks. After a few cycles, the fireflies begin to blink in unison. When the fireflies are arranged in different configurations, different patterns emerge. He is selling kits and has instructions for building your own. Videos of the fireflies after the jump.

Continue reading “64 Synchronizing Fireflies” →

Blu-Ray Laser Keychain

June 25, 2009 by Zach Banks 56 Comments

blu-ray-laser

[Jay] hacked a Blu-Ray laser diode into a keychain enclosure. He found a heavy brass keychain light from Lowe’s and stuffed the diode and a larger battery inside. The existing batteries weren’t powerful enough, so he drilled out the endcap to fit a 200mAh 3.6v lithium battery inside. He also modded the power button to only momentarily turn on the diode. With the larger battery, the laser can run for about an hour between charges. In addition to a Blu-Ray lasers, he also has versions with a 200mW red diode.

Related: Laser projector zippo

Keychain GPS Finder

June 25, 2009 by Steve Watkins 7 Comments

gps keychain navigation

With a user interface consisting of two buttons and a three digit display, the GPS finder guides the user back to a saved location. Nine locations can be saved for navigation recall. Press a button to save location and press another button to recall. Each switch has a secondary function, for management purposes such as memory indexes and power features. An AarLogic GPS 3A module and AVR microcontroller make up the guts. With the popularity of Geocaching, this would make an impressive trinket; Leading the hunter to an undocumented treasure.

Bus Pirate Firmware Update V0g

June 25, 2009 by Ian 10 Comments

buspiratefirmwarev0g

Firmware v0g for all Bus Pirate revisions is now available. Updates in this release include a bootloader, frequency generator/pulse-width modulator, SPI bus sniffer, MIDI library, configuration reports, improved user interface, and bug fixes. v0g is also the first firmware to fully support the v2 hardware branch.

We’re really proud of this release as it brings a much more consistent structure to the internal operation of the Bus Pirate. It lays the foundation for future CAN, LIN, and OBDII libraries, and it supports localization and translations. Install and upgrade instructions are included with the firmware. Report bugs on the project issue tracker.

We document the new features after the break.

Continue reading “Bus Pirate Firmware Update V0g” →

Wide Angle Lense Mod For The ATC2K

June 25, 2009 by Caleb Kraft 6 Comments

wal

For those that have them, the ATC2K action camera is a decent little piece of equipment. It is waterproof and can save video for roughly 30 minutes on a flash card. The viewing angle of the lens leaves something to be desired though. This has been remedied in newer models. [raalst] shows us how to modify the ATC2K to install a new, wider angle lens, while retaining the waterproof seal. He also takes us through a necessary mod to ensure clear video under water since the new lens was not initially intended for it. Just in case you are curious, he’s using his for hobby radio controlled submarine dives.

Econo Monome

June 25, 2009 by Caleb Kraft 2 Comments

[youtube=http://www.youtube.com/watch?v=6mKjRakndSk]

[Mike] really liked the thought of the Monome, especially the green aspect of their construction. He felt he could take it a step further. After 40 years of electronics tinkering, he had quite a spare parts box. He constructed his monome clone from stuff he just had laying around. All of his pieces were either rejected samples from his company or outdated parts destined for the trash bin. Great job [Mike]. If you are planning to build one and don’t have the buttons laying around, you can get a more typical monome look and feel by going with the sparkfun RGB pads, like we did back in March.

[via Makezine]